Bedienungsanleitung Makita HR2650 (Seite 9 von 22) (Deutsch)

691062

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

9 ENGLISH

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Switch action

CAUTION:

Before plugging in the tool, always

check to see that the switch trigger actuates properly

and returns to the "OFF" position when released.

CAUTION: Switch can be locked in “ON” posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in “ON”

position and maintain rm grasp on tool.

►Fig.1: 1. Switch trigger 2. Lock button

►Fig.2: 1. Switch trigger 2. Lock button

Tostartthetool,simplypulltheswitchtrigger.Tool

speed is increased by increasing pressure on the switch

trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger, push

in the lock button and then release the switch trigger.

Tostopthetoolfromthelockedposition,pulltheswitch

trigger fully, then release it.

Reversing switch action

CAUTION: Always check the direction of

rotation before operation.

NOTICE:

Use the reversing switch only after the

tool comes to a complete stop. Changing the direction

of rotation before the tool stops may damage the tool.

NOTICE: If the switch trigger cannot be

depressed, check to see that the reversing switch

is fully set to position / (A side) or / (B

side).

For HR2650/HR2651/HR2651T

Thistoolhasareversingswitchtochangethedirec-

tion of rotation. Move the reversing switch lever to the

position (Aside)forclockwiserotationortotheposi-

tion (B side) for counterclockwise rotation.

►Fig.3: 1. Reversing switch lever

For HR2661

Thistoolhasareversingswitchtochangethedirec-

tion of rotation. Move the reversing switch lever to

the position(Aside)forclockwiserotationor

the position (B side) for counterclockwise rotation.

►Fig.4: 1. Reversing switch lever

NOTE: When you operate the tool in counterclock-

wise rotation, the switch trigger is pulled only halfway

and the tool runs at half speed. For counterclockwise

rotation, you cannot push in the lock button.

Changing the quick change chuck

for SDS-plus

For HR2651T

ThequickchangechuckforSDS-pluscanbeeasily

exchangedforthequickchangedrillchuck.

Removing the quick change chuck

for SDS-plus

CAUTION: Before removing the quick change

chuck for SDS-plus, be sure to remove the bit.

Grasp the change cover of the quick change chuck

for SDS-plus and turn in the direction of the arrow

until the change cover line moves from the symbol

to the symbol. Pull forcefully in the direction of the

arrow.

►Fig.5: 1. Quick change chuck for SDS-plus

2. Change cover 3. Change cover line

Installing the quick change drill

chuck

Check the line of the quick change drill chuck shows

the symbol. Grasp the change cover of the quick

change drill chuck and set the line to the symbol.

Place the quick change drill chuck on the spindle of the

tool. Grasp the change cover of the quick change drill

chuck and turn the change cover line to the

symbol

until a click can clearly be heard.

►Fig.6: 1. Quick change drill chuck 2. Spindle

3. Change cover line 4. Change cover

Selecting the action mode

NOTICE: Do not rotate the action mode chang-

ing knob when the tool is running.Thetoolwillbe

damaged.

NOTICE: To avoid rapid wear on the mode

change mechanism, be sure that the action mode

changing knob is always positively located in one

of the three action mode positions.

Rotation with hammering

For drilling in concrete, masonry, etc., rotate the action

mode changing knob to the symbol. Use a tungsten-

carbide tipped bit (optional accessory).

►Fig.7: 1. Rotation with hammering 2.Actionmode

changing knob

Rotation only

For drilling in wood, metal or plastic materials, rotate

the action mode changing knob to the symbol. Use a

twist drill bit or wood drill bit.

►Fig.8: 1. Rotation only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HR2650 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita HR2650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info