Bedienungsanleitung Makita HR2661 (Seite 10 von 22) (Deutsch)

691065

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

10 ENGLISH

Hammering only

For chipping, scaling or demolition operations, rotate

the action mode changing knob to the symbol. Use a

bull point, cold chisel, scaling chisel, etc.

►Fig.9: 1. Hammering only

Adjusting the nozzle position

Pushintheguidewhilepressingtheguideadjustment

button, and then release the button at the desired

position.

►Fig.10: 1. Guide 2.Guideadjustmentbutton

NOTE:Beforeadjustingthenozzleposition,release

thenozzleforwardcompletelybypressingtheguide

adjustmentbutton.

Adjusting the drilling depth

Slidethedepthadjustmentbuttontothedesiredposi-

tionwhilepressingit.Thedistance(A)isthedrilling

depth.

►Fig.11: 1.Depthadjustmentbutton

Torque limiter

NOTICE: As soon as the torque limiter actuates,

switch off the tool immediately.Thiswillhelppre-

vent premature wear of the tool.

NOTICE: Drill bits such as hole saw, which tend

to pinch or catch easily in the hole, are not appro-

priate for this tool.Thisisbecausetheywillcause

the torque limiter to actuate too frequently.

Thetorquelimiterwillactuatewhenacertaintorque

levelisreached.Themotorwilldisengagefromthe

output shaft. When this happens, the drill bit will stop

turning.

Hook

CAUTION: Never hook the tool at high loca-

tion or on potentially unstable surface.

For HR2661

►Fig.12: 1. Hook

Thehookisconvenientfortemporarilyhangingthetool.

Tousethehook,simplyliftuphookuntilitsnapsinto

the open position. When not in use, always lower hook

until it snaps into the closed position.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and unplugged before carrying out

any work on the tool.

Side grip (auxiliary handle)

CAUTION: Always use the side grip to ensure

safe operation.

CAUTION: After installing or adjusting the

side grip, make sure that the side grip is rmly

secured.

Installthesidegripsothatthegroovesonthegriptin

theprotrusionsonthetoolbarrel.Turnthegripclock-

wisetosecureit.Thegripcanbexedatdesiredangle.

►Fig.13: 1. Side grip

Grease

Coat the shank end of the drill bit beforehand with a

small amount of grease (about 0.5 - 1 g).

Thischucklubricationassuressmoothactionandlon-

ger service life.

Installing or removing drill bit

Clean the shank end of the drill bit and apply grease

before installing the drill bit.

►Fig.14: 1. Shank end 2. Grease

Insertthedrillbitintothetool.Turnthedrillbitandpush

it in until it engages.

Afterinstallingthedrillbit,alwaysmakesurethatthe

drill bit is securely held in place by trying to pull it out.

►Fig.15: 1. Drill bit

Toremovethedrillbit,pullthechuckcoverdownallthe

way and pull the drill bit out.

►Fig.16: 1. Drill bit 2. Chuck cover

Chisel angle (when chipping,

scaling or demolishing)

Thechiselcanbesecuredatthedesiredangle.To

change the chisel angle, rotate the action mode chang-

ingknobtotheOsymbol.Turnthechiseltothedesired

angle.

►Fig.17: 1.Actionmodechangingknob

Rotate the action mode changing knob to the

sym-

bol.Thenmakesurethatthechiselissecurelyheldin

place by turning it slightly.

Depth gauge

Thedepthgaugeisconvenientfordrillingholesof

uniform depth. Loosen the side grip and insert the depth

gaugeintotheholeonthesidegrip.Adjustthedepth

gauge to the desired depth and tighten the side grip

rmly.

►Fig.18: 1. Hole 2. Depth gauge

NOTE: Make sure that the depth gauge does not

touch the main body of the tool when attaching it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HR2661 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita HR2661

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info