Bedienungsanleitung Makita HS0600 (Seite 6 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691834

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

6 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: HS0600

Blade diameter 255 mm 260 mm 270 mm

Max. Cutting depth at 0° 94 mm 97 mm 101 mm

at 45° bevel 65 mm 68 mm 71 mm

at 50° bevel 59 mm 61 mm 63 mm

No load speed 4,300 min

-1

Overall length 418 mm

Net weight 6.9 kg

Safety class

/II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2014

Intended use

Thetoolisintendedforperforminglengthwaysand

crossways straight cuts and mitre cuts with angles in

woodwhileinrmcontactwiththeworkpiece.With

appropriate Makita genuine saw blades, other materials

can also be sawed.

Power supply

Thetoolshouldbeconnectedonlytoapowersupplyof

the same voltage as indicated on the nameplate, and

canonlybeoperatedonsingle-phaseACsupply.They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

For public low-voltage distribution

systems of between 220 V and 250 V

Switching operations of electric apparatus cause volt-

ageuctuations.Theoperationofthisdeviceunder

unfavorable mains conditions can have adverse effects

totheoperationofotherequipment.Withamains

impedance equal or less than 0.28 Ohms it can be pre-

sumedthattherewillbenonegativeeffects.Themains

socket used for this device must be protected with a

fuse or protective circuit breaker having slow tripping

characteristics.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to 62841-2-5:

Sound pressure level (L

):94dB(A)

Sound power level (L

):105dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to 62841-2-5:

Workmode:cuttingwood

Vibration emission (a

h,W

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measured in accordance with the standard test method

and may be used for comparing one tool with another.

NOTE:

Thedeclaredvibrationemissionvaluemay

also be used in a preliminary assessment of exposure.

WARNING:

Thevibrationemissionduringactual

use of the power tool can differ from the declared emission

value depending on the ways in which the tool is used.

WARNING:

Be sure to identify safety measures to pro-

tect the operator that are based on an estimation of exposure

in the actual conditions of use (taking account of all parts of

the operating cycle such as the times when the tool is switched

off and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HS0600 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info