Bedienungsanleitung Makita HS301D (Seite 5 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691835

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

5ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: HS301D

Blade diameter 85 mm

Max. Cutting depth at 0° 25.5 mm

at 45° 16.5 mm

No load speed 1,500 min

-1

Overall length 313 mm 331 mm

Rated voltage D.C. 10.8 V

Battery cartridge BL1015, BL1020B BL1040B

Net weight 1.6 kg 1.8 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003

Intended use

Thetoolisintendedforperforminglengthwaysand

crossways straight cuts and mitre cuts with angles in

woodwhileinrmcontactwiththeworkpiece.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN60745:

Sound pressure level (L

):71dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN60745:

Work mode: cutting wood

Vibrationemission(a

h,W

):2.5m/s

or less

Uncertainty(K):1.5m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measured in accordance with the standard test method and

maybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclaredvibrationemissionvaluemayalsobe

used in a preliminary assessment of exposure.

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

toprotecttheoperatorthatarebasedonanestima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Cordless Circular Saw

ModelNo./Type:HS301D

Conforms to the following European Directives:

2006/42/EC

Theyaremanufacturedinaccordancewiththefollowing

standard or standardized documents: EN60745

Thetechnicalleinaccordancewith2006/42/ECis

availablefrom:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

9.4.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING:

Read all safety warnings and all

instructions. Failure to follow the warnings and instruc-

tionsmayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Cordless circular saw safety

warnings

Cutting procedures

DANGER:

Keep hands away from cutting area

and the blade. Keep your second hand on auxiliary

handle, or motor housing.Ifbothhandsareholding

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HS301D Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info