Bedienungsanleitung Makita LM430D (Seite 18 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

598580

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

17. Keep guards in place and in working order.

18. Keep hands and feet away from rotating blades.

Caution — Blades coast after turn off.

19. Remove key before servicing, cleaning or

removing material from the gardening appliance.

20. Use only the manufacturer genuine blades spec-

ified in this manual.

21. Check the blades carefully for cracks or damage

before operation. Replace cracked or damaged

blades immediately.

22. Be sure the area is clear of other people before

mowing. Stop mower if anyone enters the area.

23. Remove foreign matters such as rocks, wire,

bottles, bones and large sticks from the work

area before mowing to prevent personal injury or

damage to the mower.

24. Stop operation immediately if you notice any-

thing unusual. Switch off the mower and remove

the key from the appliance. Then inspect the

mower.

25. Never attempt to make wheel height adjustments

while mower is running.

26. Release switch lever and wait for blade rotation

to stop before crossing driveways, walks, roads,

and any gravel-covered areas.

Also remove key if you leave it, reach to pick up

or remove something out of your way, or for any

other reason that may distract you from what

you are doing.

27. Objects struck by the lawn mower blade can

cause severe injuries to persons. The lawn

should always be carefully examined and

cleared of all objects prior to each mowing.

28. If lawn mower strikes a foreign object, follow

these steps:

– Stop the mower, release the switch lever and

wait until the blade comes to a complete stop.

– Remove the lock key and the battery car-

tridge.

– Thoroughly inspect the mower for any dam-

age.

– Replace the blade if it is damaged in any way.

Repair any damage before restarting and con-

tinuing to operate the mower.

29. Check the rear bag frequently for wear or deteri-

oration. For storage, always make sure the rear

bag is empty. Replace a worn bag with a new fac-

tory replacement bag for safety.

30. Stop the motor and remove key whenever you

leave the equipment, before cleaning the mower

housing, and before making any repairs or

inspections.

31. Use extreme caution when reversing or pulling

the machine towards you.

32. Stop the blade(s) if the machine has to be tilted

for transportation when crossing surfaces other

than grass, and when transporting the machine

to and from the area to be used.

33. Never operate the machine with defective guards

or shields, or without safety devices, for exam-

ple deflectors and/or grass collector, in place.

34. Switch on the motor carefully according to

instructions and with feet well away from the

blade(s).

35. Do not tilt the machine when switching on the

motor, except if the machine has to be tilted for

starting. In this case, do not tilt it more than

absolutely necessary and lift only the part, which

is away from the operator.

36. Do not start the machine when standing in front

of the discharge opening.

37. Do not put hands or feet near or under rotating

parts. Keep clear of the discharge opening at all

times.

38. Do not transport the machine while the mower is

turned on.

39. Stop the machine, and remove the disabling

device. Make sure that all moving parts have

come to a complete stop

– whenever you leave the machine,

– before clearing blockages or unclogging

chute,

– before checking, cleaning or working on the

machine,

– after striking a foreign object. Inspect the

machine for damage and make repairs before

restarting and operating the machine;

40. If the machine starts to vibrate abnormally

(check immediately)

– inspect for damage,

– replace or repair any damaged parts,

– check for and tighten any loose parts.

41. Be careful during adjustment of the machine to

prevent entrapment of the fingers between mov-

ing blades and fixed parts of the machine.

42. Mow across the face of slopes, never up and

down. Exercise extreme caution when changing

direction on slopes. Do not mow excessively

steep slopes.

43. Do not wash with a hose; avoid getting water in

motor and electrical connections.

44. Check the blade mounting bolt at frequent inter-

vals for proper tightness.

45. Keep all nuts, bolts, and screws tight to be sure

the equipment is in safe working condition.

46. Always allow the machine to cool down before

storing.

47. When servicing the blades be aware that, even

though the power source is switched off, the

blades can still be moved.

48. Replace worn or damaged parts for safety. Use

only genuine replacement parts and accesso-

ries.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita LM430D Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita LM430D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info