Bedienungsanleitung Makita M2401 (Seite 7 von 22) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691529

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

7 ENGLISH

Additional safety warnings

1. Watch out for ying sparks when operating.

Theycancauseinjuryorignitecombustible

materials.

2. Secure work. Use clamps or a vise to hold

work when practical.It'ssaferthanusingyour

handanditfreesbothhandstooperatetool.

3. Secure the wheel carefully.

4. Be careful not to damage the spindle, anges

(especially the installing surface) or bolt, or

the wheel itself might break.

5. Keep guards in place and in working order.

6. Hold the handle rmly.

7. Keep hands away from rotating parts.

8. Make sure the wheel is not contacting the

work-piece before the switch is turned on.

9. Before each use, watch for utter or excessive

vibration that might be caused by poor instal-

lation or a poorly balanced wheel.

10. Remove material or debris from the area

that might be ignited by sparks. Be sure that

others are not in the path of the sparks. Keep

a proper, charged re extinguisher closely

available.

11. If the wheel stops during the operation, makes

an odd noise or begins to vibrate, switch off

the tool immediately.

12. Always switch off and wait for the wheel to

come to a complete stop before removing,

securing workpiece, working vise, changing

work position, angle or the wheel itself.

13. Do not touch the workpiece immediately after

operation; it is extremely hot and could burn

your skin.

14. Store wheels in a dry location only.

SAVE THESE INSTRUCTIONS.

INSTALLATION

WARNING: This tool produces spark when

cutting a workpiece. Do not install this tool in

the place in which ammable and/or explosive

materials might be ignited by the spark from the

tool. Also make sure that there is no such material

near the tool before starting the operation.

Securing the base

Thistoolshouldbeboltedwithtwoboltstoaleveland

stablesurfaceusingtheboltholesprovidedinthetool's

base.Thiswillhelppreventtippingoverandpossible

personalinjury.

►Fig.1: 1.Boltholes2.Base

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Unlocking/locking tool head

Thetoolheadcanbelocked.

Whenusing,unhookthelockchainfromthehook.

Whennotinuseorcarrying,alwayshookthelockchain

to the hook.

►Fig.2: 1. Hook 2. Lock chain

Switch action

WARNING: Before plugging in the tool,

always check to see that the switch trigger actu-

ates properly and returns to the "OFF" position

when released.

►Fig.3: 1.Lockbutton/Lock-offbutton2. Switch

trigger

For tool with lock button

Tostartthetool,simplypulltheswitchtrigger.Release

theswitchtriggertostop.Forcontinuousoperation,

pulltheswitchtrigger,pushinthelockbuttonandthen

releasetheswitchtrigger.Tostopthetoolfromthe

lockedposition,pullthetriggerfully,thenreleaseit.

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

For tool with lock-off button

Topreventtheswitchtriggerfrombeingaccidentally

pulled,alock-offbuttonisprovided.Tostartthetool,

pressthelock-offbuttonandpulltheswitchtrigger.

Releasetheswitchtriggertostop.

WARNING: NEVER defeat the lock-off button

by taping down or some other means.Aswitchwith

anegatedlock-offbuttonmayresultinunintentional

operationandseriouspersonalinjury.

WARNING: NEVER use the tool if it runs when

you simply pull the switch trigger without press-

ing the lock-off button.Aswitchinneedofrepair

mayresultinunintentionaloperationandserious

personalinjury.ReturntooltoaMakitaservicecenter

forproperrepairsBEFOREfurtherusage.

NOTICE: Do not pull the switch trigger hard

without pressing in the lock-off button.Thiscan

causeswitchbreakage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita M2401 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info