Bedienungsanleitung Makita M4301 (Seite 6 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691531

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

6 ENGLISH

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Jig saw safety warnings

1. Hold power tool by insulated gripping sur-

faces, when performing an operation where

the cutting accessory may contact hidden wir-

ing or its own cord.Cuttingaccessorycontacting

a "live" wire may make exposed metal parts of the

power tool "live" and could give the operator an

electric shock.

2. Use clamps or another practical way to secure

and support the workpiece to a stable plat-

form.Holdingtheworkbyhandoragainstyour

bodyleavesitunstableandmayleadtolossof

control.

3. Always use safety glasses or goggles.

Ordinary eye or sun glasses are NOT safety

glasses.

4. Avoid cutting nails. Inspect workpiece for any

nails and remove them before operation.

5. Do not cut oversize workpiece.

6. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the oor, workbench, etc.

7. Hold the tool rmly.

8. Make sure the blade is not contacting the

workpiece before the switch is turned on.

9. Keep hands away from moving parts.

10. Do not leave the tool running. Operate the tool

only when hand-held.

11. Always switch off and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

12. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

13. Do not operate the tool at no-load

unnecessarily.

14. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier

safety data.

15. Always use the correct dust mask/respirator

for the material and application you are work-

ing with.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Selecting the cutting action

►Fig.1: 1.Cuttingactionchanginglever

Thistoolcanbeoperatedwithanorbitalorastraight

line(upanddown)cuttingaction.Theorbitalcutting

actionthruststhejigsawbladeforwardonthecutting

stroke and greatly increases cutting speed.

Tochangethecuttingaction,justturnthecuttingaction

changing lever to the desired cutting action position.

Refertothetabletoselecttheappropriatecutting

action.

Position Cutting action Applications

0 Straight line cutting

action

For cutting mild

steel, stainless

steel and plastics.

For clean cuts in

wood and plywood.

I Smallorbitcutting

action

For cutting mild

steel, aluminum

and hard wood.

II Mediumorbit

cutting action

For cutting wood

and plywood.

For fast cutting in

aluminum and mild

steel.

III Largeorbitcutting

action

For fast cutting in

wood and plywood.

Switch action

CAUTION: Before plugging in the tool, always

check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

►Fig.2: 1. Switch trigger 2.Lockbutton

To start the tool, simply pull the switch trigger. Tool

speedisincreasedbyincreasingpressureontheswitch

trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger, push

inthelockbuttonandthenreleasetheswitchtrigger.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita M4301 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info