Bedienungsanleitung Makita mkt 9046 (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

389733

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

Explanation of general view

1 Conventional type of abrasive

paper

2 Clamp lever

3Pad

4 Velcro type of abrasive paper

5 y mark

mark

7 Dust bag

8 Entry port

9 Dust spout

10 Groove

11 Front fixing cardboard

12 Paper dust bag

13 Claws

14 Upper part

15 Notch

16 Guide

17 Lock button

18 Switch trigger

19 Front grip

SPECIFICATIONS

Model 9046

Pad size ............................................. 115 mm x 229 mm

Abrasive paper size ........................... 115 mm x 280 mm

Orbits per minute .................................................... 6,000

Overall length ..................................................... 283 mm

Net weight ................................................................ 3 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed Safety

instructions.

SPECIFIC SAFETY RULES

GEB021-1

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to sander safety rules. If you use this tool unsafely or

incorrectly, you can suffer serious personal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a "live" wire will make exposed

metal parts of the tool "live" and shock the oper-

ator.

2. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

3. Hold the tool firmly.

4. Do not leave the tool running. Operate the tool

only when hand-held.

5. This tool has not been waterproofed, so do not

use water on the workpiece surface.

6. Ventilate your work area adequately when you

perform sanding operations.

7. Some material contains chemicals which may be

toxic. Take caution to prevent working dust inha-

lation and skin contact. Follow material supplier

safety data.

8. Use of this tool to sand some products, paints

and wood could expose user to dust containing

hazardous substances. Use appropriate respira-

tory protection.

9. Be sure that there are no cracks or breakage on

the pad before use. Cracks or breakage may

cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Installing or removing the abrasive paper

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the paper.

When using the conventional type of abrasive paper

(standard equipment) (Fig. 1 & 2):

Turn the clamp lever counterclockwise. Insert the paper

end into the clamper, aligning the holes in the paper with

those in the pad. Then return the clamp lever to the origi-

nal position to secure the paper. Repeat the same pro-

cess for the other end of the tool, maintaining the proper

paper tension.

When using the velcro type of abrasive paper (optional

accessory) (Fig. 3):

Remove all dirt or foreign matter from the pad. Attach the

paper to the pad, aligning the holes in the paper with

those in the pad.

CAUTION:

Always use velcro type of abrasive papers. Never use

pressure-sensitive abrasive papers.

Dust bag (Fig. 4)

To install the dust bag, align the

mark on the bag’s

entry port with the y mark on the dust spout of the tool

and fit the entry port onto the dust spout. Then turn the

dust bag clockwise to secure it in place. For the best

results, empty the dust bag when it becomes about half

full. To remove the dust bag, follow the installation proce-

dures in reverse.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita mkt 9046 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info