Bedienungsanleitung Makita SC 120DA (Seite 5 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448638

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

Explanation of general view

1 Battery cartridge

2 Set plate

3 Charging light

4 Fast charger

5 Switch trigger

6 Hex socket head bolt M6 x 16

7 Flat washer 6

8 Cutter head

9 Blade A

10 Blade B

11 Cutter rod

12 Loosen

13 Tighten

14 Screwdriver

15 Stopper

16 Claw of stopper

17 Spring

18 Stopper securing bolt

19 Threaded rod

20 X direction

21 Y direction

22 M8 or M10

23 M12

24 Hex bolt

SPECIFICATIONS

Model SC120DA

Cutting capacities

Mild steel ................................................M8, M10, M12

Cutting speed ................................................2.5 seconds

Overall length ......................................................316 mm

Net weight ................................................................. 4 kg

Rated voltage ....................................................D.C. 12 V

• Due to our continuing program of research and

development, the specifications herein are subject to

change without notice.

• Note: Specifications may differ from country to country.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

ENC001-3

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge only

MAKITA type rechargeable batteries. Other types

of batteries may burst causing personal injury

and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or sold

by the battery charger manufacturer may result

in a risk of fire, electric shock, or injury to

persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when

disconnecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

10. Do not disassemble charger or battery cartridge;

take it to a qualified serviceman when service or

repair is required. Incorrect reassembly may

result in a risk of electric shock or fire.

11. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance

or cleaning. Turning off controls will not reduce

this risk.

12. The battery charger is not intended for use by

young children or infirm persons without

supervision.

13. Young children should be supervised to ensure

that they do not play with the battery charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may result

in a risk of overheating, possible burns and even

an explosion.

15. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

ADDITIONAL SAFETY RULES FOR CHARGER

& BATTERY CARTRIDGE

1. Do not charge Battery Cartridge when

temperature is BELOW 10°C (50°F) or ABOVE

40°C (104°F).

2. Do not attempt to use a step-up transformer, an

engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

8. Be careful not to drop, shake or strike battery.

9. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita SC 120DA Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info