Bedienungsanleitung Makita UB 120D (Seite 4 von 6) (Englisch, Holländisch)

448665

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

OPERATING INSTRUCTIONS

Installing or removing battery cartridge (Fig. 1)

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the

tool while pressing the push buttons on both sides of

the cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If not, it may accidentally fall out

of the tool, causing injury to you or someone around

you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Blowing (Fig. 2)

For dust blowing, attach the nozzle to blower outlet, turn-

ing clockwise to lock it in place.

Dust suction (Fig. 3 & 4)

For dust suction, fit nozzle onto suction inlet and dust

bag onto blower outlet.

After the bag fills with dust, empty the contents of the

dust bag into a dust bin by releasing the fastener.

CAUTION:

Empty the dust bag before it becomes too full, or the suc-

tion force weakens.

Switch action (Fig. 5)

CAUTION:

Before inserting the battery cartridge into the tool, always

check to see that the switch trigger actuates properly and

returns to the “OFF” position when released.

To start the tool, simply pull the trigger. Tool speed is

increased by increasing pressure on the trigger. Release

the trigger to stop.

Air volume adjusting dial (Fig. 5)

Air volume can be adjusted to any of three settings by

turning the adjusting dial with the switch trigger fully

depressed. Refer to the table below for the relationship

between the number on the dial and the air volume.

CAUTION:

• Use the adjusting dial only after the switch trigger

returns to the “OFF” position. Turning the dial before

the trigger returns may damage the tool.

• If the tool is operated continuously until the battery car-

tridge has discharged, rest the tool for at least 15 min-

utes before proceeding with a fresh battery.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the bat-

tery cartridge is removed before carrying out any work on

the tool.

Cleaning (Fig. 6)

From time to time, wipe off the outside of the tool using a

cloth dampened in soapy water. Never use gasoline, thin-

ner or the like, or discoloration and/or cracks can take

place.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Nozzle

•Dust bag

• Corner nozzle

• Straight pipe

• Flexible hose

• Joint

• Various type of Makita genuine batteries and chargers

Number on the dial Air volume

3 High

2 Medium

1Low

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UB 120D Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita UB 120D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info