Bedienungsanleitung Makita UC 120D (Seite 6 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448667

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

Explanation of general view

1Button

2 Battery cartridge

3Screw

4 Sprocket guard

5 Hex wrench

6Bolt

7 Guide bar

8 Cutter

9 Revolving direction

10 Sprocket

11 Chain tension adjusting spring

12 Concave portion of guide bar

13 Chain oil

14 Saw chain

15 Lock-off button

16 Switch trigger

17 Scabbard (chain cover)

18 Battery cover

19 Tip guard

20 Cutting force pushes chain

saw toward operator.

21 Front face of housing

22 Cutting force pulls chain saw

away from operator.

23 Shallow undercut

24 Finish cut from top

25 Chain saw will be pinched.

26 Branch will splinter.

27 Screwdriver

28 Spike

SPECIFICATIONS

Model UC120D

Chain speed per minute ................................ 160 m/min.

Effective cutting length ....................................... 115 mm

Saw chain type ....................................................... 25AP

Saw chain pitch .........................................................1/4”

No. of drive links .......................................................... 42

Net weight ............................................................. 2.2 kg

Rated voltage .................................................... D.C. 12 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for cutting off branches.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

ENC004-1

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

ADDITIONAL SAFETY RULES

FOR CHAIN SAW

1. Don’t expose chain saw to rain. Don’t use it in

damp or wet locations.

2. Hold the chain saw firmly with both hands when

the motor is running.

3. Install saw chain properly according to this

instruction manual.

4. Do not overreach. Keep proper footing and bal-

ance at all times.

5. Keep all parts of the body away from the saw

chain when the motor is operating.

6. Before you start the saw, make sure the saw

chain is not contacting anything.

7. Switch off the chain saw immediately if you

notice anything abnormal in operation.

8. Carefully inspect the chain saw if you drop or

strike it against something hard.

9. When not in use, chain saws should be stored in

a dry, and high or locked-up place — out of reach

of children. When storing saw, use a scabbard

(chain cover).

10. Use safety glasses. Also use safety footwear;

snug fitting clothing; protective gloves; and

head protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UC 120D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info