Bedienungsanleitung Makita UC 4030 (Seite 12 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Norwegisch)

79158

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Intended use

Electric saws

This electric saw may be used only for sawing wood.

It is intended for occasional use in thin wood, caring

for fruit trees, felling, removing limbs, and trimming to

length.

Persons who may not sue the saw:

This saw must not be used by persons who are not

familiar with this instruction manual, children, young

people, or anyone under the influence of alcohol, drugs

or medication.

Chain saw safety warnings: DO NOT let comfort

or familiarity with product (gained from repeated

use) replace strict adherence to chain saw safety

rules. If you use this tool unsafely or incorrectly,

you can suffer serious personal injury.

1. Keep all parts of the body away from the saw

chain when the chain saw is operating. Before

you start the chain saw, make sure the saw

chain is not contacting anything. A moment of

inattention while operating chain saws may cause

entanglement of your clothing or body with the saw

chain.

2. Always hold the chain saw with your right hand

on the rear handle and your left hand on the

front handle. Holding the chain saw with a reversed

hand configuration increases the risk of personal

injury and should never be done.

3. Wear safety glasses and hearing protection.

Further protective equipment for head, hands,

legs and feet is recommended. Adequate

protective clothing will reduce personal injury by

flying debris or accidental contact with the saw

chain.

4. Do not operate a chain saw in a tree. Operation

of a chain saw while up in a tree may result in

personal injury.

1 2

Delivery inventory

1. Electric chain saw

2. Guide bar

3. Saw chain

4. Cord grip for electric cord

5. Chain protection cover

6. Instruction manual (not shown)

In the case that one of the parts listed should not be

included in the delivery inventory, please, consult your

sales agent.

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine: Chain Saw

Model No./ Type: UC3030A, UC3530A, UC4030A,

UC4530A, UC3530AP, UC4030AP

are of series production and

Conforms to the following European Directives:

2000/14/EC, 98/37/EC until 28th December 2009

and then with 2006/42/EC from 29th December 2009

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex V.

Measured Sound Power Level: 101.8 dB

Guaranteed Sound Power Level: 103 dB

30th January 2009

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UC 4030 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info