Bedienungsanleitung Makita UH201D (Seite 11 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690688

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

11 ENGLISH

WARNING: Wear ear protection.

ThetypicalA-weightednoiseleveldeterminedaccord-

ingtoEN60745:

UM600D/UH201D with shear blade for hedge trim-

mer installed

Sound pressure level (L

):74dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

minedaccordingtoEN50636:

UM600D/UH201D with shear blade for grass shear

installed

Vibrationemission(a

):2.5m/s

or less

Uncertainty(K):1.5m/s

Thevibrationtotalvalue(tri-axialvectorsum)deter-

minedaccordingtoEN60745:

UM600D/UH201D with shear blade for hedge trim-

mer installed

Vibrationemission(a

):2.5m/s

or less

Uncertainty(K):1.5m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measured in accordance with the standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclaredvibrationemissionvaluemay

alsobeusedinapreliminaryassessmentofexposure.

WARNING:Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclared

emission value depending on the ways in which the

tool is used.

WARNING:Besuretoidentifysafetymeasures

toprotecttheoperatorthatarebasedonanestima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

thetimeswhenthetoolisswitchedoffandwhenitis

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool.Failuretofollowallinstructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Cordless Grass Shear Safety

Warnings

General instructions

1. To ensure correct operation, user has to read

this instruction manual to make himself famil-

iar with the handling of the equipment.Users

insufcientlyinformedwillriskdangertothem-

selves as well as others due to improper handling.

2. Never allow children, persons with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge or people

unfamiliar with these instructions to use the

machine, local regulations may restrict the age

of the operator.

3. Use the equipment with the utmost care and

attention.

4. Operate the equipment only if you are in good

physical condition. Perform all work calmly

and carefully. Use common sense and keep in

mind that the operator or user is responsible

for accidents or hazards occurring to other

people or their property.

5. Never operate the machine while people, espe-

cially children, or pets are nearby.

6. The motor is to be switched off immediately in

case that the equipment shows any problem or

abnormal sign.

7. Switch off and remove the battery cartridge

when resting and when leaving the equipment

unattended, and place it in a safe location to

prevent danger to others or damage to the

equipment.

8. Avoid using the machine in bad weather

conditions especially when there is a risk of

lightning.

Personal protective equipment

1. Wear eye protection and stout shoes at all

times while operating the machine.

2. Always wear substantial footwear and long

trousers while operating the machine.

Starting up the equipment

1. Make sure that there are no children or other

people nearby, also pay attention to any ani-

mals in the working vicinity. Otherwise stop

usingtheequipment.

2. Before use always check that the equipment

is safe for operation. Check the security of the

cutting tool and the guard and the switch trig-

ger/lever for easy and proper action. Check for

clean and dry handles and test the function of

the start/stop.

3. Check damaged parts before further use of

the equipment. A guard or other part that is

damaged should be carefully checked to deter-

mine that it will operate properly and perform

its intended function. Check for alignment of

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UH201D Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info