Bedienungsanleitung Makita UH201D (Seite 15 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690688

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

15 ENGLISH

NOTICE: Do not pull the switch trigger forcibly

without pressing the lock-off button.Theswitch

maybreak.

►Fig.3: 1. Switch trigger 2.Lock-offbutton

Tostartthetool,depressthelock-offbuttonandpullthe

switchtrigger.Releasetheswitchtriggertostop.The

lock-offbuttoncanbepressedfromeithertherightor

leftside.

Indicator lamp

Theindicatorlampblinksorlightsupwhentheremain-

ingbatterycapacityisloworempty.Theindicatorlamp

alsolightsupwhenthetoolbecomesoverloaded.

►Fig.4: 1. Indicator lamp

Lamp status and action to be taken

Indicator lamp Status Actiontobetaken

Thelampblinks

red.

Theremaining

batterycapacity

is low.

Chargethebattery.

Thelamplightsup

red. *

Thetoolhas

stoppedbecause

the remaining

batterycapacityis

empty.

Chargethebattery.

Thetoolhas

stopped due to

overload.

Turnoffthetool.

*Thetimeatwhichtheindicatorlamplightsupvariesdepending

onthetemperaturearoundtheworkareaandthebatterycar-

tridge conditions.

Adjusting the shearing height (for

grass shear)

CAUTION: When changing the shearing

height, be sure to attach the blade cover and be

careful not to trap ngers between the tool and

grass receiver.

Theshearingheightcanbesettothreelevels(15mm,

20mm,and25mm)bychangingthexedpositionof

thegrassreceiver.Theshearingheightwithoutthe

grassreceiverisabout10mm.

1. Slidethegrassreceivertowardthefrontofthe

tool.

►Fig.5: 1. Grass receiver

2. Changethexedpositionofthegrassreceiverby

movingitinthedirectionofthearrow.

►Fig.6

NOTE:Theshearingheightvalueisaguideline.The

actual shearing height may vary depending on the

conditionofthelawnortheground.

NOTE:Tryatestshearinginalessconspicuous

place to get your desired height.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

CAUTION: When replacing the shear blades,

always wear gloves and attach the blade cover so

that your hands and face do not directly contact

the blades.

NOTICE: When replacing the shear blades, do

not wipe off grease from the gear and crank.

Installing or removing the blade

cover

CAUTION: Be careful not to touch the blades

when installing or removing the blade cover.

Toremovethebladecover,pullitslightly,andthenslide

itsideways.Toinstallthebladecover,performthesteps

in reverse.

►Fig.7

Installing or removing the grass

receiver

CAUTION: When installing or removing the

grass receiver, be sure to attach the blade cover

and be careful not to trap your ngers between

the tool and grass receiver.

Removing the grass receiver

1. Release the protrusions on the grass receiver

fromthegroovesonthetoolwhileslidingthegrass

receivertowardthefrontofthetool.

►Fig.8: 1. Grass receiver

2. Releasethehingeofthegrassreceiverfromthe

tool.

Installing the grass receiver

1. Hookthehingeofthegrassreceiveronthegroove

ofthetool.

►Fig.9: 1. Hinge 2. Grass receiver

2. Aligntheprotrusionsonthegrassreceiverwith

thegroovesonthetoolbyslidingthegrassreceiver

towardthefrontofthetoolandmovingitinthedirection

ofthearrow.

►Fig.10

NOTICE: Do not attach the hinge of the grass

receiver to the tool forcibly after aligning the pro-

trusions on the grass receiver with the grooves

on the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UH201D Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info