Bedienungsanleitung Makita UM603D (Seite 14 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690689

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

14 ENGLISH

Removing the grass receiver

1. Release the protrusions on the grass receiver

fromthegroovesonthetoolwhileslidingthegrass

receivertowardthefrontofthetool.

►Fig.7: 1. Grass receiver

Releasethehingeofthegrassreceiverfromthetool.

Installing the grass receiver

1. Hookthehingeofthegrassreceiveronthegroove

ofthetool.

►Fig.8: 1. Hinge 2. Grass receiver

Aligntheprotrusionsonthegrassreceiverwiththe

groovesonthetoolbyslidingthegrassreceivertowardthe

frontofthetoolandmovingitinthedirectionofthearrow.

►Fig.9

NOTICE: Do not attach the hinge of the grass

receiver to the tool forcibly after aligning the pro-

trusions on the grass receiver with the grooves

on the tool.

Installing or removing the shear

blades for grass shear

Removing the shear blades

1. Remove the grass receiver and place the tool

upside down.

►Fig.10

2. While pressing the lock lever, turn the undercover

counterclockwise until

on the undercover is aligned

with

on the lock lever.

►Fig.11

3. Removetheundercover,shearblades,andcrank.

►Fig.12: 1.Undercover2.Shearblades3. Crank

Installing the shear blades

1. Preparethecrank,undercover,andnewshear

blades.

►Fig.13: 1. Crank 2.Undercover3.Shearblades

2. Removethebladecoverfromtheoldshear

blades,andthenattachittothenewones.

►Fig.14

3. Adjustthethreepinssothattheyarelinedupon

the alignment line.

►Fig.15: 1.Alignmentline

4. Applyasmallamountofgreasetotheperiphery

ofthecrank.Attachthecranktothepinswiththesmall

andlargeroundsfacingup.

►Fig.16: 1. Crank

5. Adjustthebladesandbaseplatesothatthehole

inthebaseplateandthetwoprotrusionsontheblades

are lined up.

►Fig.17

6. Turntheshearbladesupsidedownandinstall

themsothatthepinsonthetooltintheholeonthe

baseplate.Makesurethattheshearbladesarexed

securely in place.

►Fig.18

7. Placetheundercoversothat

on the under-

cover is aligned with on the lock lever.

►Fig.19

8. While pressing the undercover, turn the under-

cover clockwise until

on the undercover is aligned

with on the lock lever.

►Fig.20

9. Makesurethatthelocklevertsinthegrooveon

the undercover.

►Fig.21: 1. Lock lever

CAUTION: Never use the tool without install-

ing the undercover.

10. Removethebladecover,andthenturnonthetool

to check that it works properly.

NOTICE: If the shear blades do not operate prop-

erly, the blades are not engaging the crank prop-

erly. Remove the blades and install them again.

Installing or removing shear blades

for hedge trimmer

Optional accessory

CAUTION: Attach the blade cover before

removing or installing the shear blades.

Removing shear blades

1. Placethetoolupsidedown.

►Fig.22

2. While pressing the lock lever, turn the undercover

counterclockwise until

on the undercover is aligned

with on the lock lever.

►Fig.23

3. Remove the undercover.

►Fig.24

4. Loosen two screws with a screwdriver and remove

theshearblades.

►Fig.25: 1. Screws

NOTE:Theshearbladescanberemovedwithout

removing the screws.

5. Removethecrankfromtheshearblades.

►Fig.26: 1. Crank

NOTE:Thecrankmayremaininthetool.

NOTE:Attachthebladecoverandthestoragecase

totheremovedshearblades,andthenstorethe

blades.

Installing shear blades

1. Preparethecrank,undercover,andnewshear

blades.

►Fig.27: 1. Crank 2.Undercover3.Shearblades

2. Attachthebladecovertotheshearblades.

►Fig.28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UM603D Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info