Bedienungsanleitung Makita UX361D (Seite 7 von 17) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

507669

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

further side of the line which is indicated by the arrow

marks.

Mounting the attachment (Fig. 9)

To mount the attachment to a power unit:

1. Make sure that the lock lever is not tightened.

2. Align the pin with the arrow mark.

3. Insert the shaft into the drive shaft of the power unit

until the release button pops up.

4. Tighten the lock lever firmly as shown.

To remove the attachment, loosen the lock lever, press

the lock button and withdraw the shaft.

NOTICE:

• Do not tighten the lock lever without the shaft of the

attachment inserted. Otherwise the lock lever may

tighten the entrance of the drive shaft too much and

damage it.

Attaching shoulder harness (Fig. 10)

Put the shoulder harness on your left shoulder by putting

your head and right arm through it. Keep the tool on your

right side.

After putting the shoulder harness, attach it to the tool by

connecting the buckles provided on both the tool hook

and the harness. Be sure that the buckles click and lock

completely in place.

Adjust the strap to the suitable length for your operation.

(Fig. 11)

The buckle is provided with a means of quick release

which can be accomplished by simply squeezing the

sides and the buckle.

WARNING:

• Be extremely careful to maintain control of the tool

at all times. Do not allow the tool to be deflected

toward you or anyone in the work vicinity. Failure to

keep control of the tool could result in serious injury to

the bystander and the operator.

MAINTENANCE

WARNING:

• Always be sure that the tool is switched off and

battery cartridge is removed before attempting to

perform inspection or maintenance on the tool.

Failure to switch off and remove the battery cartridge

may result in serious personal injury from accidental

start-up.

NOTICE:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection

first. If you find a problem that is not explained in the

manual, do not attempt to dismantle the tool. Instead, ask

Makita Authorized Service Centers, always using Makita

replacement parts for repairs.

012662

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Brushcutter attachment

• Hedge trimmer attachment

• Pole saw attachment

• Cultivator attachment

• Coffee harvester attachment

• Shaft extension attachment

• Makita genuine battery and charger

Malfunction status Cause Action

Motor does not run. Battery cartridge is not installed. Install the battery cartridge.

Battery problem (under voltage) Recharge the battery. If recharging is

not effective, replace battery.

The drive system does not work

correctly.

Ask your local authorized service center

for repair.

Motor stops running after a little use. Rotation is in reverse. Change the direction of rotation with the

reversing switch.

Battery’s charge level is low. Recharge the battery. If recharging is

not effective, replace battery.

Overheating. Stop using of tool to allow it to cool

down.

It does not reach maximum RPM. Battery is installed improperly. Install the battery cartridge as described

in this manual.

Battery power is dropping. Recharge the battery. If recharging is

not effective, replace battery.

The drive system does not work

correctly.

Ask your local authorized service center

for repair.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UX361D Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info