Bedienungsanleitung Makita VC001GL (Seite 15 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793654

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

15 ENGLISH

Installing hose

NOTICE: Never force the hose for bending or

stamp it. Never move the cleaner by pulling the

hose. Forcing, stamping and pulling the hose may

cause a breakage or deformation of the hose.

NOTICE: When picking up large wastes such as

planer carvings, concrete dusts or similar other

than small wastes, use the 38 mm inner diameter

hose (optional accessory).



󰀩

Connection to cleaner



cleaner, then turn it clockwise until it locks in place.

Fig.24: 1.2.

Connections with your work tools





work tools compatible with the cleaner, it works as a

dust extractor for your power tools.

󰀨



󰀨

cleaner hose and a dust extraction port of your tool.

Fig.25: 1.󰀨2. Cleaner hose

3. Power tool 4. Vacuum cleaner

Installing or removing cleaner

attachments

CAUTION: After installing an attachment,

check if it is securely installed. If the attachment

󰀨



Attachments without lock function

Optional accessory

Insert an attachment into the suction inlet of the cleaner

by pushing and hand screwing it in place.



tion inlet after use.

Fig.26

Attachments with lock function

Optional accessory

NOTICE: When installing the attachment with

lock function, be sure to align the release button

with the hook on the attachment. If they are not

aligned, the attachment will not be locked and may

󰀨

Insert an attachment into the suction inlet of the cleaner

by pushing them together with a click.

󰀨

release button.

Fig.27: 1. Suction inlet with lock function 2. Release

button 3. Attachment with lock function

NOTE: An attachment with lock function can only be

installed in the suction inlet with lock function.

Fig.28: 1. Attachment with lock function 2. Suction

inlet with lock function 3. Suction inlet with

out lock function

Adjusting lengths of slide-type

extension wand

Optional accessory





reach areas and comfortable positioning options.

Pull in and out the slide pipe to change wand lengths

while pressing and holding the slide button.

Release the slide button to lock the slide pipe in your

desired position.

Fig.29: 1. Slide pipe 2. Slide button

MAINTENANCE

CAUTION: Always be sure that the appliance

󰀨

removed before attempting to perform inspection

or maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.





be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

Storage of accessories

Accessories and attachments not in use, such as noz

zles and brushes, can be hooked and stored in the multi

hook at the rear of the cleaner.

Fig.30: 1. Multi hook 2. Accessories and attach

ments not in use



into the pipe holder when not using the cleaner for a

short time.

Fig.31: 1.2. Pipe

holder

A hose can be wrapped and stored around the housing

or handle of the cleaner in large loops. Connect its both

ends together to make loops and hook the loops onto

the handle raised up. Alternatively, keep its root end

installed in the hose inlet and hang the loops on the

multi hook with the loose end tied up.

Fig.32

Fig.33

Makita VC001GL Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info