Bedienungsanleitung Makita VC009G (Seite 12 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793656

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

12 ENGLISH

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Take particular care and attention.

A representative battery applicable to this

product.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equipment

and on accumulators and batteries and

waste accumulators and batteries, as well as

their adaptation to national law, waste elec-

trical equipment, batteries and accumulators

should be stored separately and delivered

to a separate collection point for municipal

waste, operating in accordance with the

regulations on environmental protection.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is intended for collecting dry dust. The tool

is suitable for commercial use, for example in hotels,

󰀩

businesses.

Noise

The typical A-weighted noise level determined accord-

ing to 60335-2-69:

Sound pressure level (LpA) : 72 dB (A)

Uncertainty (K) : 2.5 dB (A)

The noise level under working may exceed 80 dB (A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

󰀨

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

󰀨

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to 60335-2-69:

Work mode: operation without load

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

󰀨

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

󰀨

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety

warnings

WARNING: IMPORTANT! READ CAREFULLY

all safety warnings and all instructions BEFORE

USE. Failure to follow the warnings and instructions



1. Before use, make sure that this cleaner must

be used by people who have been adequately

instructed on the use of this cleaner.

2. 



3. 



metal chips, sharp materials such as razors,

needles, broken glass or the like.

4. NEVER USE THE CLEANER IN THE VICINITY

OF GASOLINE, GAS, PAINT, ADHESIVES OR

OTHER HIGHLY EXPLOSIVE SUBSTANCES.

The switch emits sparks when turned ON

and OFF. And so does the motor commutator

during operation. A dangerous explosion may

result.

5. This cleaner is not suitable for picking up

hazardous dust.

Makita VC009G Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info