Bedienungsanleitung Makita VC009G (Seite 18 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793656

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

18 ENGLISH

3. Follow the procedures below, depending on the

type of the extension wand :

NOTE: The slide-type extension wand and the ring-

type extension wand are not compatible with each

other. If you want to change the slide-type extension

wand to the ring-type extension wand or vice versa,

change the bent pipe assembly also.

For the slide-type extension wand

Shoulder the vacuum cleaner body then insert the extension

wand into the bent pipe assembly until it clicks. To discon-

nect, extract the extension wand with pressing the button.

Fig.18: 1. Bent pipe assembly 2. Button 3. Slide-

type extension wand





The length is locked when releasing the slide button.

Fig.19: 1. Slide button

For the ring-type extension wand

Shoulder the vacuum cleaner body then twist and insert

the extension wand into the bent pipe assembly. To

disconnect, twist and extract it.

Fig.20: 1. Bent pipe assembly 2. Ring-type exten-

sion wand 3. Free nozzle

NOTE: The free nozzle can be attached to the bent

pipe assembly without pipe lock directly.





length. Tighten the ring at your desired length.

Fig.21: 1. Ring

Hose hook

When you suspend the operation, the hook on the bent pipe

assembly can be used for hanging the wand on the lower belt.

Fig.22: 1. Hook 2. Lower belt



Optional accessory

CAUTION:





properly installed. Otherwise the vacuumed dust or

particles may be exhausted from the cleaner and

they may cause respiratory disease to the operator.

NOTICE: 

replace with new one. When the dust bag is

already full, empty it.

bag/dust bag full results in reduced suction power.

NOTICE:

To prevent dust from getting into the motor:

— 

installed before use.

— Do not use a broken or ripped bag.

Otherwise the motor may be broken.

NOTICE: Do not fold the cardboard at its open-



NOTICE: 

is an important component for maintaining the



bag/dust bag may cause smoke or ignition.

NOTE:

the cleaner, the front cover does not close completely.

Fig.23

1. Unlock the lever and open the dust box cover.

Fig.24: 1. Lever 2. Dust box cover

2. 

the room as illustrated.

Fig.25: 1. Slit 2. Filter bag

When using the dust bag, insert the brim of the dust bag into the slit.

Fig.26: 1. Slit 2. Brim 3. Dust bag

󰀨

push the cardboard portion to the end. Make sure that the

󰀨

Fig.27: 1.2. Rim on

󰀨3. Cardboard portion of the

4.󰀨

4. Lock the dust box cover certainly.

CAUTION: -

gers when hooking the latch, and when closing

the dust box cover.

Harness cover

Optional accessory

When using the harness cover, follow the procedure

below to attach it.

NOTE: When installing the harness cover, be careful

not to make a mistake on the front and back.

Fig.28

1. Spread the harness cover on the harness.

Fig.29

2. Secure the harness shoulder straps with the hook

and loop fasteners of the harness cover. Hook the band



Fig.30

OPERATION

WARNING: Operators shall be adequately

instructed on the use of the vacuum cleaner.

WARNING: This vacuum cleaner is not suit-

able for picking up hazardous dust.

CAUTION: This cleaner is for dry use only.

CAUTION:

Always insert the battery cartridge

all the way until it locks in place. If you can see the

red indicator on the upper side of the button, it is not

locked completely. Insert it fully until the red indicator

cannot be seen. If not, it may accidentally fall out of the



CAUTION: During operation, be conscious

of the vacuum cleaner on your back. You may

lose your balance if the vacuum cleaner body bumps

against a wall or the hose is hooked by an obstacle.

Makita VC009G Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info