Bedienungsanleitung Makita VC2211M (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

600418

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

or mental capabilities, or lack of experience and

knowledge.

34. Young children should be supervised to ensure

that they do not play with the cleaner.

35. Never handle plug cord or cleaner with wet hands.

36. Use extreme caution when cleaning on stairs.

37. Do not use the cleaner as a stool or work bench.

The machine may fall down and may result in

personal injury.

KEEP FOR FUTURE REFERENCE

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

WARNING:

• Before plugging the cleaner, always make sure that

the cleaner is switched off. Plugging the cleaner with

the switch on may cause an unexpected start resulting

in serious personal injury.

Switch action (Fig. 1)

To start the cleaner, rotate the switch lever to the “I” side.

To stop it, rotate the switch lever to the “O” side. (Fig. 2)

The suction force can be adjusted according to your work

need.

Suction force can be increased by turning the suction

force adjusting knob from the symbol to the symbol.

Also, set the hose diameter selection dial to the hose’s

diameter that you are going to use.

Hose diameter selection dial

Turn the dial direction in accordance with the hose you

use.

NOTE:

Do not set the dial at the middle. Always turn either side

according to the hose diameter.

Warning beep

There are two types of beeping sound. One is short

beeps, and the other is long beep.

When the air flow speed falls under 20 m/s, the cleaner

emits short warning beeps for safety reasons. When it

sounds, check the hose diameter selection dial or if the

suction force is not too low. If the beeps keep sounding,

perform maintenance or ask your local service center.

When the tank is filled with liquid, the cleaner emits long

warning beep.

When the tank is full and the beep sounds, switch off the

cleaner and empty the tank.

Connecting electric power tools (Fig. 3

& 2)

WARNING:

• Make sure that both the cleaner and the electric power

tool are switched off before connecting or

disconnecting. Connecting the power tool to the

cleaner with both of them being switched on may cause

unexpected and sudden start resulting serious

personal injury.

• Never connect an electric power tool with an input

power exceeding that specified in the

“SPECIFICATIONS” to the socket of the cleaner by

turning the suction force adjusting knob. Connecting

the electric power tool exceeding the specified input

power may cause overheat and damage to the cleaner.

• When connecting a grounded tool, insert a plug with a

grounding plate to the socket of the cleaner.

The cleaner can be connected to an electric power tool up

to input power shown in the “SPECIFICATIONS”.

1. To connect an electric power tool, open the outlet cap

and insert the power tool plug into the socket of the

cleaner.

2. When connecting an electric power tool, secure the

power supply cord and hose by the hose bands at

regular distance. It prevents the hose from entangling

the power supply cord. (Fig. 4)

3. Rotate the switch lever to the “AUTO” position.

4. Move the suction force adjusting knob to the position

suitable for the input power of the electric power tool

you intend to use.

5. Switching on and off of the connected electric power

tool simultaneously brings the cleaner switching on

and off action. The cleaner still works for a few

seconds even after the electric power tool is switched

off.

6. After use, disconnect the power tool from the socket of

cleaner.

7. Switch off the cleaner after use.

Auto-suction stop during suction

operation

WARNING:

• Do not pick up foam or soapy liquid. Picking up

foam or soapy liquid can cause foam to come out of air

exit before the auto-suction stop works. Continuing to

using in this condition may cause an electric shock and

breakage of the cleaner.

The cleaner has a mechanism that prevents water from

immersing into the motor when picking up more than a

certain amount of water.

When the tank is full with liquid, the cleaner emits long

warning beep. Switch off the cleaner and empty the tank

when this beep sounds.

Usage of base hook

CAUTION:

• Be careful not to pinch your fingers when closing

the base hook. Failure to do so may cause personal

injury.

NOTICE:

• Do not apply an excessive force on the base hook. The

excessive force on the base hook may damage the

base hook. Close the base hook when not in use.

Opening the base hook allows the following usage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita VC2211M Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info