Bedienungsanleitung Makita VC4210L (Seite 26 von 48) (Deutsch, Englisch, Holländisch, Französisch)

711045

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

*) Optional accessories / Option depending on model

Original instruction

Makita VC4210L

5. Attach suitable nozzle to the tube. Choose noz-

zle depending on what type of material that is to

be picked-up.

6. If used for dust extraction in connection with

dust producing tool then connect end of suction

hose with appropriate adapter.

7. Connect the plug into a proper electrical outlet.

8. Put the electrical switch into position I in order to

start the motor.

Turn I:

Activate the machine

Turn

Stop the machine. Permanent power

on socket

Turn AUTO :

Activate Auto-On/Off operation

Turn I +

Activate the machine with

deactivated automatic filter cleaning

function

Turn AUTO +

Activate Auto- On/Off operation

with deactivated automatic filter

cleaning function

Suction power control operation on

separate turning knob

3.2 Auto-On/Off socket outlet for power tools

CAUTION

Appliance socket.

The appliance socket is designed for electrical

auxiliary equipment; see technical data for refer-

ence.

1. Prior to plugging in an appliance, always switch

off the machine and the appliance that is to be

connected.

2. Read the operating instructions to the appliance

to be connected and observe the safety notes

contained in these.

An appliance socket with earthing contact is inte-

grated in the machine. An external power tool can

be connected there. The socket features permanent

power on, when the electrical switch is in position

, i.e. the machine can be used as an extension

cord.

In position AUTO the machine can be switched on

and off by the power tool connected. Dirt is picked

up from the source of dust immediately. To comply

with regulations, only approved dust producing tools

should be connected.

The maximum power consumption of the connected

electrical appliance is stated in section “Specifica-

tions”.

Before turning the switch to position AUTO ensure

that the tool connected to the appliance socket is

switched off.

3.3 AutoClean

The machine is equipped with an automatic filter

cleaning system, AutoClean. A frequent cleaning cy-

cle will automatically run during operation to ensure

that suction performance is always at its best.

If suction performance decreases or in extensive

dust applications a manually filter cleaning operation

is recommended:

1. Switch off the machine.

2. Close the nozzles or suction hose opening with

the palm of your hand.

3. Turn the switch to position „I“ and let the ma-

chine operate at full speed for approx. 10 sec-

onds with the suction hose opening closed.

If suction power is still reduced take out the filter and

clean mechanically or replace filter.

For certain applications, like wet pick up, it is recom-

mended to turn off the automatic filter cleaning sys-

tem. For details see chapter 3.1.

3.4 Antistatic connection

CAUTION

The machine is equipped with an antistatic

system to discharge any static electricity that

may develop during dust pick-up.

The antistatic system is placed in front part of the

motor top and creates an earth ground connection to

the inlet fitting of the container.

For proper function the use of an electrical conduc-

tive or antistatic suction hose is recommended.

1. When inserting the optional disposal bag make

sure the antistatic connection is kept.

3.5 Cooling air filter

To protect the electronics and motor, the machine is

equipped with a cooling air diffusor. Clean the cool-

ing air diffusor regularly.

For areas with a high concentration of fine dust in

the surrounding air it is recommended to equip the

machine with an optional cooling air filter cartridge to

prevent dust from settling inside the air channels and

motor. Contact your local sales representative.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita VC4210L Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info