Bedienungsanleitung Mamiya 645 AFD III (Seite 8 von 56) (Englisch)

494220

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Batteries Care

1. Battery life of the originally supplied batteries is dependant on storage conditions.

2. Blots and fingerprints on terminals may cause loose connection and corrosion. Wipe

them off before loading the batteries.

3. It is advised to carry spare batteries in remote or foreign locations.

4. Battery performance decreases in low temperatures. Keep them warm when in cold

climates or locations.

External battery case PE401 is available as an optional accessory.

5. Store the batteries in a cool and dry place, away from direct sunlight.

6. Remove the batteries from the camera body when they will not be used for a long

time.

7. Replace the batteries with new ones as soon as they are exhausted. Liquid leakage

from the battery may damage the camera.

8. Read the label warnings of the batteries for their handling.

Battery Power / Battery Care

Remaining battery

charge display

Battery power

● The camera’s power is turned on when the drive

dial is set to “S,” “C” or “M.UP.” In order to prevent

the camera’s batteries from discharging, sleep

mode is automatically established if no operations

are performed for a specific period of time while the

power is ON (with exposure metering status

maintained).

● The initial setting for the exposure metering

status maintenance period is 15 seconds. It can be

changed at any time to a period within a 5- to 60-

second range using the custom settings. (C-04 on

page 93)

● In sleep mode, operating the shutter button or function setting button restores power

ON status.

● In sleep mode, the shutter speed and f-number among the external LCDs go off, and

the marks shown in the figure are displayed. (These marks appear in program AE

mode.)

For the purpose of the descriptions and explanations provided in these

instructions, it is assumed that the camera’s power is on.

13 14

Installing the Battery in the Magazine

2. Insert a battery.

Insert the battery according to the polarity indica-

tion in the battery compartment, and close the

battery cover.

Battery used: Sony CR2032 or equivalent

■ Be sure to insert the battery with the correct

polarity

The button battery supplies power to the magazine's LCD when the film magazine is

detached from the camera.

1. Remove the battery compartment

screw cap.

Use a coin or suitable screw driver and turn it

counter clockwise.

★ When the magazine is installed onto the body, the power will be supplied to the maga-

zine from the camera body.

★ You can take shots without installing the battery into the magazine. However, if you

remove the magazine from the body, the magazine does not indicate film sensitivity

or number of shots.

★ The magazine does not have a battery level indicator. When the magazine LCD panel

becomes dark or disappears, replace the battery. As a rough guideline, the battery

should last approx. one year.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mamiya 645 AFD III Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info