Bedienungsanleitung Mamiya RZ67pro (Seite 32 von 43) (Englisch)

15432

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Multiple Exposures

you complete step 3 above, but remove the cable re-

lease without making an exposure (step 4), the shutter

will be released as soon as the cable release is re-

moved.

Even when using mirror-up operation,

everytime

the shutter is cocked, the mirror is

relowered.

There-

fore,

is possible to check the

viewfinder

before each

frame is exposed.

A convenient

double

cable release is available as

accesory.

Since one end of the release screws into

the

Shutter

Release Button and the other end into the

Mirro-up Socket, if is possible to use the same release

to raise the mirror and later release the shutter.

CAUTION

As long as a cable release remains attached to the

Mirror-up Socket, it is possible to use the same re-

lease to raise the mirror and later release the shutter.

Photograph by merely pressing the Shutter Release

Button.

lf the red line around the Mirror-up Socket

is still visi-

ble when the cable release

removed, the camera is

still set for mirror-up operation. If such is the case,

reattach the cable release, making sure that the soc-

ket retracts as you remove it once again.

The shutter should be released with the cable re-

lease within 50 seconds of pressing the Shutter Re-

lease Button. If this is not done, the buzzer

will

sound

after 50 seconds and

continue

for

seconds before

stopping.

. If

you

release the shutter with the cable release after

the buzzer stops, the shutter speed will be

1/400

sec.

If you wish to use a shutter speed other than

1/400

sec. after the buzzer stops, follow the procedure for

multiple exposure.

Using Bulb with Mirror-up Operation

1. Attach cable release to Mirror-up Socket.

2. Set the Shutter Speed Dial to B

Press the Shutter Release Button (mirror rises).

Press plunger of cable release (shutter opens).

5. Press Shutter Release Button (shutter closes).

1. Set the R-M Lever to

‘M’

(multiple expo-

sure). The lever can be moved to ‘M’ either be-

fore or after releasing the shutter.

2. Press the Cocking Lever as far as it will go

in order to

cock the shutter and set the mirror.

The film will not move at this time. The shutter

can now be released, creating a double expo-

sure. This procedure can be repeated as often

as desired.

When photographing the same

subject

2 or

times exposure compensation is necessary. The

same is true with different

subjects

that are all evenly

illuminated.

With

subjects of

different

brightness, the

darker one is

normally

photographed first. However, it

is not within the scope of this

operating

manual to

teach multiple exposure technique, as many excellent

books dealing with this

subject

are already

available.

After completing your

multiple

exposure, im-

mediately replace the R-M Lever to its normal pos-

tion. If this is not done, the shutter may later be re-

leased mistakenly, not only

ruining

the

multlple

expo-

sure, but also ruining the additional exposure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mamiya RZ67pro Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info