Bedienungsanleitung Manhattan PLAZA ST 300 (Seite 9 von 15) (Englisch)

589964

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Set Multisat Search 2, LNB No 2 and select horizontal TP from low band. Adjust skew (externally) to - value

for maximum signal and quality.

Set Multisat Search 3, LNB No 3 and select vertical TP from high band. Adjust skew (externally) to + value for

maximum signal and quality.

Set Multisat Search 4, LNB No 4 and select horizontal TP from high band. Adjust skew (externally) to - value

for maximum signal and quality.

Finally press OK key on Start.

ADVANCE SEARCH: Special Feature

This feature is used when you want to search a satellite for any new channels or those not included in the

Database or you do not have the full data of the channel. In INSTALL menu, go to Advance Search

NOTE: Searching with this feature is slower than normal search.

Symbol Rate: Select option. If you select ALL it will scan with all Symbol Rates applicable. To define symbol rate, select

User Defined and press OK. A sub menu will appear. Select and press OK on the symbol rates you wish to apply and

finally EXIT.

Start Freq: Using 0-9 keys, enter the start frequency here. The search will start from this frequency

End Freq: Using 0-9 keys, enter the end frequency here. The search will stop after this frequency

Polarity: select polarity.

Positioner: Select positioner if required. Configure this as described earlier.

Start: Press OK. TP search will start. Below Searching page will appear.

TUNING WIDEBAND LNB (in Advance Search)

NOTE: It is not possible to do index search in Advance Search and therefore each LNB No has to be tuned

individually. Configure LNB as described earlier. Go to Advance Search and perform search for each LNB No

that is pre adjusted for skew by external means.

TO CHANGE CHANNEL OR SATELLITE

There are two ways of changing channel or satellite as below.

SORTING THE CHANNEL LIST

Press Green key to sort channels alphabetically.

Press Yellow key to sort channels Free To Air first followed by Scrambled.

Press Red key to return to normal list.

TO SELECT A CHANNEL WITHIN THE SAME SATELLITE

Press OK key and browser will appear on your screen.

€Ÿ Use CH and PAGE up / down keys to scroll through the list.

€ Press OK on required channel

TO SELECT A CHANNEL FROM ANOTHER SATELLITE

€¡ Use VOL up / down to change the list.

€¢ Use CH and PAGE up / down to scroll through the list

€£ Press OK on required channel

. The antenna positioner will

automatically move

to that satellite. If you are using DiSEqC switch,

then it will switch to that antenna.

LNB No: Select number.

Satellite: Select satellite name.

Search Mode: Select search option. Option + D includes data channels

€¤ ALL - All Video and Radio channels.

€¥ FTA - Free To Air Video and Radio channels

€¦ ALL + D -All Video, Radio and Data channels.

Scan Freq: Select option. If you select All it will scan the complete frequency

related to the LNB type you have selected. To define the frequency, select

User

Defined. This will allow you to enter the frequency on below menu lines.

Shows serial number of TP, Frequency, Symbol Rate (S/R), Polarity and FEC.

After the search for TP has finished, it will start channel search

automatically and display the TV and Radio channels found.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Manhattan PLAZA ST 300 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info