7. Hand transmitter
14 Operating Instructions, Comfort 220.2, 250.2, 252.2, 250.2 speed GB (#83988)
Plugging in the module antenna.
8.1 / 1
8.1 Connecting the operator system
Connecting to the power supply.
8.1 / 2
• Connect one end of the transmission plug to the
hand transmitter.
• At the free end of the transmission plug, short-circuit
one of the outer pins with the centre pin adjacent to
it (e.g. using a screw driver).
• Press the desired button on the hand transmitter.
A new code is then generated by the integrated
random coding facility.
The LED flashes quickly.
As soon as the LED lights up permanently, the hand
transmitter has been programmed with a new code.
The button can then be released and the transmission
plug removed.
Advice:
- After the hand transmitter has been
re-programmed, the operator system
must also be re-programmed to
respond to the new code.
- For multi-channel transmitters, the
programming process must be carried
out for each button separately.
Changing the code.
7.2.2 / 1
7.2.2 Change coding
8. Initial operation
