Bedienungsanleitung Marantec Comfort 257.2 (Seite 3 von 40) (Englisch)

742762

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

3. General safety advice

Please read carefully!

Target group

This operator system may only be installed, connected and put into

operation by qualified and trained professionals!

Qualified and trained specialist personnel are persons

- who have knowledge of the general and special safety regulations,

- who have knowledge of the relevant electro-technical regulations,

- with training in the use and maintenance of suitable safety equipment,

- who are sufficiently trained and supervised by qualified electricians,

- who are able to recognise the particular hazards involved when working

with electricity,

- with knowledge regarding applications of the EN 12635 standard

(installation and usage requirements).

Warranty

For an operations and safety warranty, the advice in this instruction

manual has to be observed. Disregarding these warnings may lead

to personal injury or material damage. If this advice is disregarded, the

manufacturer will not be liable for damages that might occur.

Batteries, fuses and bulbs are excluded from warranty.

To avoid installation errors and damage to the door and operator system,

it is imperative that the installation instructions are followed. The system

may only be used after thoroughly reading the respective mounting and

installation instructions.

The installation and operating instructions are to be given to the door

system user, who must keep them safe.

They contain important advice for operation, checks and maintenance.

This item is produced according to the directives and standards

mentioned in the Manufacturer's Declaration and in the Declaration of

Conformity. The product has left the factory in perfect condition with

regard to safety.

Power-operated windows, doors and gates must be checked by an expert

(and this must be documented) before they are put into

operation and thereafter as required, but at least once a year.

Correct use

The operator system is designed exclusively for opening and closing

garage doors.

The operator must be used in a dry place.

The maximum push and pull force must be observed.

Door requirements

The door must:

- stand still alone (by balance of springs),

- run smoothly.

Beside the advice in these instructions, please observe the general

safety and accident prevention regulations!

Our sales and supply terms and conditions are effective.

Information on installing the operator system

• Ensure that the door is in good mechanical condition.

• Ensure that the door can stop in any position.

• Ensure that the door can be easily moved in the OPEN and CLOSE

directions.

• Ensure that the door opens and closes properly.

• Remove all unnecessary components from the door (e.g. cables, chains,

brackets).

• Render any installations inoperable that will no longer be needed after

the operator system has been installed.

• Before commencing cabling works it is very important to disconnect the

operator system from the electricity supply.

Ensure that the electricity supply remains disconnected throughout the

cabling works.

• Adhere to the local protection regulations.

• Lay the electricity supply cables and control cables; these MUST be laid

separately. The controls voltage is 24 V DC.

• Install the operator system with the door in the CLOSED position.

• Install all the impulse transmitters and control devices (e.g. remote

control buttons) within sight of the door and at a safe distance from

the moving parts of the door. A minimum installation height of 1.5 m

must be observed.

• Permanently fix the warning signs, which advise of the danger of

becoming trapped, at conspicuous locations.

• Ensure that no part of the door extends across public footways or roads

when the installation is complete.

Information on commissioning the operator system

After initial operation, the persons responsible for operating the door

system, or their representatives must be familiarised with the use of the

system.

• Make sure that children cannot access the door control unit.

• Before moving the door, make sure that there are neither persons nor

objects in the operating range of the door.

• Test all existing emergency command devices.

• Never insert your hands into a running door or moving parts.

• Pay attention to any parts of the door system that could cause crushing

or shearing damage or accidents.

The EN 13241-1 regulations must be observed.

Information on servicing the operator system

Grease and oil can attack the plastic materials of the drive system and

lead to the plastic becoming cracked and fractured. To prevent damage,

the drive system must not be oiled or greased.

To ensure proper operation, the following items must be checked

regularly and repaired if necessary.

Before any works to the door system are undertaken, the operator system

must be disconnected from the mains.

• Check once a month to ensure that the operator system reverses

if the door encounters an obstacle.

Depending on the operational direction of the door, place a

50 mm high/wide obstacle in its path.

• Check the settings of the OPEN and CLOSE automatic cut-out function.

• Check all movable parts of the door and operator system.

• Check the door system for signs of wear or damage.

• Check whether the door can be easily moved by hand.

Information on cleaning the operator system

Never use water jets, high pressure cleaners, acids or bases for cleaning.

Installation and Operating Instructions, Comfort 257.2 GB (#99737) 3

Marantec Comfort 257.2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantec Comfort 257.2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info