742762
13
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
8.1 / 2
Attention!
To ensure that the system functions properly,
- the plugs of the system cable (A) must be
inserted in the designated sockets in the
motor unit (B) and in the operating control (C),
and
- the connecting cables (E + F) must be
connected up correctly.
Motor unit Connection Control unit
XW40 <---> XW40A
B
A
D
C
XW40
XW40A
8.1 Cabling of the operator system and the
Control vario control
Loosen all 4 screws on the housing cover.
Swivel all four screws away from the cover.
Open the housing cover out to one side.
8.1 / 1
Advice:
The screws need not be removed in order to
open the housing cover. Advice:
Programming can be disabled with the DIP
switch (D).
ON Programming enabled
OFF Programming disabled
8. Initial operation
Attention!
- To avoid damage, it is essential that the
following points be observed:
- The local protection regulations are to be
complied with at all times.
- - The mains cables and control cables MUST
be laid separately.
- To maintain the specified protection category
of the operating system, the cables must be
fitted with the correct gaskets.
Caution!
Danger of electric shock:
Before cabling works commence, a check must
be carried out to ensure that the cables are at
zero voltage.
Measures must be taken to ensure that the
cables remain dead for the duration of the
works (e.g. prevent the power supply from
being switched back on).
Installation and Operating Instructions, Comfort 257.2 GB (#99737) 13
Connect the mains routing cable (E) to the motor unit (B) and
the control unit (C).
Break open the cable inlet in the control unit (C) at position (G).
Feed the mains cable (F) into the control unit (C) through
opening (G).
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantec Comfort 257.2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Marantec Comfort 257.2

Marantec Comfort 257.2 Bedienungsanleitung - Deutsch - 40 seiten

Marantec Comfort 257.2 Bedienungsanleitung - Deutsch - 40 seiten

Marantec Comfort 257.2 Bedienungsanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info