English Page 24
G. Display functions and programming possibilities
Advice:
If the photocell / photocells are correctly mounted and aligned,
the function 'photocell' is recognized automatically during
programming!
Attention!
The operator has seven programming levels.
For normal operation of the operator you only program the end
positions and the remote control in the 1st programming level.
Button must not be pressed longer than 10 sec. because otherwise some
important parameters set by factory will be changed.
Changes in the extended programming level may only be carried out
by specialists.
• Before programming the operator, insert a battery into your hand transmitter.
Programming is carried out with the three buttons (, or ).
Advice:
The programming is cancelled if none of the three buttons (,
, ) is actuated during a time period of more than 120 sec.
All functions saved before with button remain unchanged.
When programming is cancelled, LED 6 is flashing.
After shortly pressing button the error message 7 is displayed.
Menu 2: Automatic cut-out OPEN
Menu 1: External photocell
Menu 3: Automatic cut-out CLOSE
Menu 4: Offset learned power limit
Menu 5: Operator speed
> 10 sek.
Release
