636181
24
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
24 Operating instructions, Comfort 360, 370, 380 (#101258 – EN)
Level Menu
6
Variable
speed
1 Speed OPEN
2 Speed soft running OPEN
3 Soft running position OPEN
4 Speed CLOSE
5 Speed smart running CLOSE
6 Speed soft running CLOSE
7 Smart running position CLOSE
8 Soft running position CLOSE
9 Soft start time OPEN
10 Soft start time CLOSE
7
Service and
maintenance
1 Gate cycle counter
2 Maintenance counter
3 Maintenance interval
8 Reset service and maintenance
9 Fault indication
8
System settings
1 Photocell
2 Closing edge safety device
3 Automatic cut-out function
4 Operating modes
5 Function of the direction command
device
6 Function of the pulse command device
7 Force relief in the GATE CLOSED
position (back-jump)
8 Direction of rotation
10 Position of the frame photocell
4.8.3 Contents of the special functions
Level 1 – Basic functions
Menu 3 – Intermediate position OPEN
Setting with button + (OPEN) and – (CLOSE).
Closing function is possible with automatic closing.
It is only possible to use the most recently
programmed intermediate position.
Menu 4 – Intermediate position CLOSED
Setting with button + (OPEN) and – (CLOSE).
Closing function is not possible with automatic closing.
It is only possible to use the most recently
programmed intermediate position.
Level 1 – Basic functions
Menu 7 – Relay output
(only programmable with optional relay)
1
) Signal light (available / not available)
“Level3,Menu7-Signallight”
2 Gate position OPEN
3 Gate position CLOSED
4 Intermediate position OPEN
5 Intermediate position CLOSED
6 Drive system starts (wipe pulse 1 second)
7 Fault
8
Lighting time
“Level5,Menu4-Lightingtime”
9 Locking release (drive system running)
10 Locking release (drive system stationary)
11
Lock release (drive system starts /
wipe pulse 3 seconds)
12 Anti-opening mechanism
13
Radio remote control (relay switches for the
duration of the pulse)
“Level 4, Menu 8 - Drive lighting ON / OFF or
relayoutput”
14
Test pulse for closing edge safety device (relay
issues a test pulse and switches for 300 ms)
Menu 8 – RESET
The drive system can be reset to the factory settings.
After a reset of the control or replacement of the
control box, all desired individual settings must be
input again.
1 ) No reset
2
Reset control
(Connected modules (bus modules,
remote control) must be reset separately)
3 Reset remote control (telegrams are deleted)
4
Reset expansion automatic closing
“Level3-Automaticclosing”
5
Reset only expanded drive functions (apart from
gate position OPEN/CLOSE and remote control
pulse)
6 Reset safety elements (photocell / hold circuit)
7
Reset bus modules (connected bus modules are
taught)
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

marantec-comfort-370

Suche zurücksetzen

  • Hallo herzchen! Mein Name ist Luisa!!!
    Ich liebe Oralsex! Schreib mir - is.gd/QoA1tR Eingereicht am 5-10-2023 20:44

    Antworten Frage melden
  • hallo wie kann ich meinen handsender einstellen ? dass er sich um 1 sekunde verzögert beim draufdrücken Eingereicht am 1-1-2018 11:27

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantec Comfort 370 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Marantec Comfort 370

Marantec Comfort 370 Bedienungsanleitung - Deutsch - 36 seiten

Marantec Comfort 370 Bedienungsanleitung - Holländisch - 26 seiten

Marantec Comfort 370 Bedienungsanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info