Bedienungsanleitung Marantec Comfort 530 (Seite 5 von 12) (Englisch)

742779

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Operating instructions, Comfort 530 (#102775 – GB) 5

4. Installation

DANGER!

Life-threatening danger due to electric shock!

• It is vital that you disconnect the operator system from the

power supply before commencing cabling work. Take measures

to ensure that the power supply remains disconnected for the

duration of the work.

• Observe the local safety regulations.

• It is imperative that you lay power cables separately from control

cables. The control voltage is 24V DC.

NOTICE

Material damage resulting from incorrect installation of the

operator!

To avoid installation errors and damage to the gate or operator

system, the following installation instructions must be observed at all

costs.

• Ensure that the gate is in good mechanical order:

– The gate can be moved easily.

– The gate opens and closes properly.

• When installing the operator system, the gate must be in the

closed position.

• Onlyusexingmaterialsthataresuitableforthefoundation

material in question.

4.1 Preparing for installation

Before commencing installation, the following works must be carried

out without fail.

Supply package

• Check that all the parts are present.

• Check that all the necessary accessory parts for your installation

situation are present.

Gate system

• Ensure that a suitable mains connection and a mains isolator

switchareavailableforyourgatesystem.Theminimumcross-

sectionoftheearthcableis3x1.5mm

• Ensure that all cables are suitable for outdoor use with respect to

UV resistance and cold resistance.

• Ensure that a suitable control unit is available for your gate system.

• Ensure that in the case of double wing gate systems a line from the

operatortothecontrolsisavailableon-site.

Theminimumcross-sectionofthecablemustbe6x0.75mm

• Ensure that your gate system has a gate stop in the CLOSE

direction.

• Disassemble the gate latches or render them inoperable.

• Ensure that the gate can be easily moved by hand.

• Please note the gate requirements:

➔ „11.1 Technical data“

For gate wing widths of 2 metres or more, the use of an electric lock is

recommended.

REFERENCE

When using and installing accessory equipment, observe the

corresponding documentation.

NOTICE

Possible malfunction of the operator system!

• Ensure that the following conditions are met:

– The motor unit must be located in a triangle of forces and

should not be parallel to the gate at the OPEN and CLOSED

gate positions.

– The movement stroke must be as large as possible.

Right: Motor unit is in triangle of forces

4.1 / 1

Wrong: Motor unit is parallel to the gate

4.1 / 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantec Comfort 530 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantec Comfort 530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info