Operating Instructions, Comfort 580 GB (#91636) 13
6. Installation
6.3 / 1
Attention!
To allow the motor unit to be taken
out at a later date, at least 35 cm of
control cable must be left loose in the
foundation box.
6.3 Installing the motor unit
• Place the four galvanised shims (A) in the corners of
the foundation box (B).
6.3 / 2
• Feed the control cable through the conduit.
• Pull the cable through to its connection position at
the control unit.
• Lower the motor unit (C) into the foundation box (B).
A
B
B
C
Tip:
If the motor unit has to be taken out of
the foundation box at a later date, two
of the screws can be replaced with the
longer screws (supplied) to make this
process easier. Before lowering the
motor unit back into the foundation
box, the short screws must be put back
into place.
6.3 / 3
