Attention!
In order to guarantee the protection
grade of the controls, the cable must
be passed through the correct screw
fixing.
6.9 / 1
• Feed the cable through the screw fitting into the
control unit.
6.9 Connection of the mains cable
Caution!
- During cabling works, the supply
cables must be disconnected from the
power supply. It must be ensured that
the cables remain disconnected from
the supply for the duration of the
cabling works.
- The fixed connection of a mains
supply requires a universally poled
mains disconnection facility.
6.8 / 8
6.8 / 9
D
Attention!
If the gate system is to function
properly, the following points must be
assured:
- For single wing gate systems, the
motor unit must always be connected
to the MASTER terminal (XM70A and
XV51A).
- For double wing gate systems, the
overlapping (D) must be observed
when connecting the motor units.
E Motor unit SLAVE
F Motor unit MASTER
6.8 / 10
• Connect the motor units to the controls.
FE
D
EF
XM70B
XM70A
6. Installation
24 Operating Instructions, Comfort 580 GB (#91636)
