Bedienungsanleitung Marantec Comfort 61 (Seite 19 von 24) (Englisch)

742770

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Operating instructions, Comfort 51, 61 (#115706 – GB) 19

6.2 Release mechanism

CAUTION!

Danger of injury due to uncontrolled movement of the

door!

When the release mechanism is operated, uncontrolled door

movements could occur:

– If the door springs are weak or broken.

– If the door is not balanced.

• When the mechanism is released, only move the door carefully

and at a moderate speed!

NOTICE

Danger of damage to property due to uncontrolled

movement of the door!

When opening the door manually, the carriage could collide with the

carriage stop.

• When the mechanism is released, only move the door carefully

and at a moderate speed!

6.2 / 1

6.2 / 2

7. Care and cleaning

DANGER!

Life-threatening danger due to electric shock!

• It is vital that you disconnect the operator system from the

power supply before cleaning. Take measures to ensure that

the power supply remains disconnected for the duration of the

cleaning operation.

NOTICE

Damage resulting from incorrect operation!

When cleaning the operator system, never use:

direct water jets, high pressure cleaners, acids or alkaline solutions.

• Clean the outside of the housing using a damp, soft cloth that

doesnotshedbres.

If particularly dirty, the housing can be cleaned using a mild detergent.

8. Maintenance

8.1 Maintenance work by the operator

Damageorweartoadoorsystemmustonlyberectiedbyqualied

and trained professionals.

To ensure fault-free operation, the door system must be inspected

regularly and, if necessary, be repaired. Before starting work on the

door system, the operator system must always be disconnected from

the power supply.

• Check once a month that the operator system reverses when the

door touches an obstacle. To check this, place an obstacle, 50 mm

in height, in the path of the door in the direction of travel.

• Check the settings of the automatic cut-out in the OPEN and

CLOSE directions.

➔“5.4.2 Checking the automatic cut-out“

• Check all the moving parts of the door system and door operator

system.

• Check the door system for signs of damage or wear and tear.

• Move the door manually to check that the door travels easily and

smoothly.

• Check all power supply cables for signs of damage.

For safety reasons, if the power supply cable is damaged it must

be replaced by the manufacturer or the manufacturer’s customer

servicedepartment,orbyasimilarlyqualiedperson.

8.2 Maintenance work by qualied and trained

professionals

Power-operated windows, doors and gates must be inspected by

qualiedandtrainedprofessionalswhenevernecessary,butatleast

once a year (written inspection records must be kept).

• Test the driving power with a force tester designed for this purpose.

• Replace any damaged or worn parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantec Comfort 61 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantec Comfort 61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info