Bedienungsanleitung Marantec Comfort 851 S (Seite 5 von 32) (Englisch)

742791

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

3. General safety advice

Operating Instructions, Comfort 850 S, 851 S GB (#114958) 5

Please read carefully!

Information on installing the operator system

• Ensure that the gate is in good mechanical condition.

• Ensure that the gate can stop in any position.

• Ensure that the gate can be easily moved in the OPEN and CLOSE

directions.

• Ensure that the gate opens and closes properly.

• Remove all unnecessary components from the gate (e.g. cables,

chains, brackets).

• Render any installations inoperable that will no longer be needed

after the operator system has been installed.

• Before commencing cabling works it is very important to disconnect

the operator system from the electricity supply.

Ensure that the electricity supply remains disconnected throughout

the cabling works.

• Adhere to the local protection regulations.

• Lay the electricity supply cables and control cables; these MUST be

laid separately. The controls voltage is 24 V DC.

• Install the operator system with the gate in the CLOSED position.

• Install all the impulse transmitters and control devices (e.g. remote

control buttons) within sight of the gate and at a safe distance

from the moving parts of the gate. A minimum installation height

of 1.5 m must be observed.

• Ensure that no part of the gate extends across public footways or

roads when the installation is complete.

Information on commissioning the operator system

After initial operation, the persons responsible for operating the gate

system, or their representatives must be familiarised with the use of

the system.

• Make sure that children cannot access the gate control unit.

• Before moving the gate, make sure that there are neither persons

nor objects in the operating range of the gate.

• Test all existing emergency command devices.

• Never insert your hands into a running gate or moving parts.

• Pay attention to any parts of the gate system that could cause

crushing or shearing damage or accidents.

The EN 13241-1 regulations must be observed.

Information on servicing the operator system

Maintenance work by the operator

Damage or wear to a door system must only be rectified by qualified

and trained professionals.

To ensure fault-free operation, the door system must be inspected

regularly and, if necessary, be repaired. Before starting work on the

door system, the operator system must always be disconnected from

the power supply.

• Check once a month that the operator system reverses when the

door touches an obstacle. To check this, place an obstacle, 50 mm

in height, in the path of the door in the direction of travel.

• Check the settings of the automatic cut-out in the OPEN and

CLOSE directions.

• Check all the moving parts of the door system and door operator

system.

• Check the door system for signs of damage or wear and tear.

• Move the door manually to check that the door travels easily and

smoothly.

• Check all power supply cables for signs of damage.For safety

reasons, if the power supply cable is damaged it must be replaced

by the manufacturer or the manufacturer’s customer service

department, or by a similarly qualified person.

Maintenance work by qualified and trained professionals

Power-operated windows, doors and gates must be inspected by

qualified and trained professionals whenever necessary, but at least

once a year (written inspection records must be kept).

• Test the driving power with a force tester designed for this

purpose.

• Replace any damaged or worn parts.

Information on cleaning the operator system

Life-threatening danger due to electric shock!

• It is vital that you disconnect the operator system from the power

supply before cleaning. Take measures to ensure that the power

supply remains disconnected for the duration of the cleaning

operation.

Damage resulting from incorrect operation!

When cleaning the operator system, never use:

direct water jets, high pressure cleaners, acids or alkaline solutions.

• Clean the outside of the housing using a damp, soft cloth that

does not shed fibres.

If particularly dirty, the housing can be cleaned using a mild

detergent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantec Comfort 851 S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantec Comfort 851 S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info