Bedienungsanleitung Marantec Comfort SU700M (Seite 4 von 52) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

742804

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2 - INTRODUCING THE PRODUCT

Code Description

SU500F 24 Vac gear motor with magnetic limit switches, gate maximum weight 500 Kg

SU700M 24 Vdc gear motor with mechanical limit switches, gate maximum weight 700 Kg

SU1100M 24 Vdc gear motor with mechanical limit switches, gate maximum weight 1100 Kg

2.1 - Description of the product

The gear motor COMFORT SU is intended to be installed within sy-

stems for the automation of sliding gates. The COMFORT SU gear

motors have been designed to automate sliding gates within the

weight limits indicated in the technical specications table.

The use of gear motors for applications which di󰀨er from those

indicated above is prohibited.

2.2 - Model and technical characteristics

3 - PRELIMINARY CHECKS

Before installing this product, verify and check the following steps:

- Check that the gate or door are suitable for automation

- The weight and size of the gate or door must be within the maxi-

mum permissible operating limits

- Check the presence and strength of the security mechanical stops

of the gate or door

- Check that the mounting area of the product is not subject to ood-

ing

- Conditions of high acidity or salinity or proximity to heat sources

could cause malfunction of the product

- Extreme weather conditions (for example the presence of snow,

ice, high temperature range, high temperatures) may increase the

friction and therefore the force required for the handling and initial

starting point may be higher than under normal conditions.

- Check that the manual operation of gate or door is smooth and

friction-free and there is no risk of derailment of the same

- Check that the gate or door are in equilibrium and stationary if left

in any position

- Check that the power line to supply the product is equipped with

proper grounding safety and protected by a magnetothermal and

di󰀨erential security device

- Provide the power system with a disconnecting device with a gap

of contacts enabling full disconnection under the conditions dictated

by the overvoltage category III.

- Ensure that all materials used for the installation comply with cur-

rent regulations

TECHNICAL DATA

MODELS SU500F SU700M SU1100M

TECHNICAL SPEC.

Speed cm/s 40 25 20

Torque Nm 23 26 38

Working cycle % 70 80 80

Control unit CBX10224F CBX10224 CBX10224

Power supply Vac (Vdc) 230(24) 230(24) 230(24)

Absorption A 1,5 1,5 1,3

Engine power W 345 345 300

Capacitor µF - - -

Thermoprotection °C 110 - -

Integrated lights - - -

Degree of protection IP 44 44 44

Dimensions (L-P-H) mm 330-210-300 330-210-300 330-210-300

Weight Kg 12,5 12,5 13

Operating temperat. °C -20+55 -20+55 -20+55

Leaves max weight Kg 500 700 1100

Sound emission level dB(A) ≤ 70 ≤ 70 ≤ 70

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantec Comfort SU700M Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info