Bedienungsanleitung Marantz bd 7004 (Seite 40 von 56) (Englisch)

139635

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Function Setup Function Setup

ENGLISH

Introduction Connections Playback Function Setup Others

To make the most of its feature, set up your speakers appropriately by referring to the table below.

Speaker setting options are available at the following locations;

(Available when you have HDMI cable connected to the HDMI OUT jack)

SETUP A Quick A HDMI Audio Out A HDMI Multi(LPCM)

SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)

SETUP A Quick A 7.1ch Audio Out A Multi Channel

SETUP A Custom A Audio A 7.1ch Audio Out A Multi Channel

How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting

1) Use [U / V] to select the menu item.

2) Use [U / V] to select setting items.

•Use [RETURN] to go back to the previous screen.

3) Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)

For “Test Tone”:

Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].

• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use

[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker

that output the test tone.

• If you want to stop the test tone, press [RETURN].

For “Default”:

Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time”

setting to the default.

4) Press [SETUP] to exit.

• For “Speaker Configuration” setting, the settings of each speaker size may be adjusted

automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set

“Center”, “Surround” and “Surround Back” to “Large”.)

• If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Configuration” to

“None”.

• “None” for “Center”, “Subwoofer”, “Surround” and “Surround Back” is not available for the speaker

setting for the audio signal output from the HDMI OUT jack .

Menu Setting items Options Descriptions

Speaker Configuration

Select the desired

speaker to set. Then

change the setting

appropriately by

referring to the

descriptions.

Front*

Large*

Large:

For the large speakers

with strong low frequency

reproduction capabilities.

Small:

For the small speakers

which do not provide

strong bass sound.

None:

No speakers.

For “Subwoofer” there is

only “On” or “None”.

Small

Center

Large*

Small/None

Subwoofer

On*

None

Surround

Large*

Small/None

Surround Back

Large*

Small/None

Default Select “Default”, then

press [ENTER] to reset the

“Speaker Configuration”

setting to the default.

Menu Setting items Options Descriptions

Channel Level

Tests or sets the

volume for each

speaker.

Test Tone*:

“Test Tone” is the test

tone which can be

output from the

speakers so that you

can adjust the volume

for each speaker.

Off* Select “Off” to deactivate

the “Test Tone” feature.

Select “Manual”, then

press [ENTER] to manually

set the volume for the

desired speaker.

Select “Auto”,then press

[ENTER] to automatically

output the test tone from

each speaker.

Manual

Auto

Front Lch 0 dB to -12 dB

(0 dB*)

If you have selected

“Manual” in “Test Tone”,

select the desired speaker

to set and adjust the

volume for the selected

speaker.

If you have selected

“Auto” in “Test Tone”, test

tone will be output

automatically in order.

Adjust the volume of the

speaker that output the

test tone.

Center 0 dB to -12 dB

(0 dB*)

Front Rch 0 dB to -12 dB

(0 dB*)

Surround Rch 0 dB to -12 dB

(0 dB*)

Surround Back Rch 0 dB to -12 dB

(0 dB*)

Surround Back Lch 0 dB to -12 dB

(0 dB*)

Surround Lch 0 dB to -12 dB

(0 dB*)

Subwoofer 0 dB to -12 dB

(0 dB*)

Default Select “Default”, then

press [ENTER] to reset the

“Channel Level” setting to

the default.

Remote control operation

buttons

Displaying the menu

Cancel the menu

Move the cursor

(Up/Down/Left/Right)

: Confirm the setting : Return to previous menu

E5LB0ED_B2ED_EN.book Page 35 Tuesday, June 2, 2009 10:23 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz bd 7004 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info