Bedienungsanleitung Marantz CC4003 (Seite 9 von 19) (Englisch)

453886

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATIONS

ADVANCED

CONNECTIONS

ADVANCED

OPERATIONS

TROUBLESHOOTING

OTHERS

BASIC

OPERATIONS

ENGLISH

BASIC OPERATIONS

NORMAL PLAYBACK

1. 2. 4.3. 5.

Track numbers

Total number of tracks Total playing time

1. Press the POWER button on the unit or on

the remote controller to turn on the power.

2. Press 0 button on the unit or remote

controller to open the disc tray. Hold the

edge of the disc and place on the tray.

• Do not touch the signal surface of a

disc.

• To play a single CD (8 cm), place the disc

with the indentation at the center of the

tray.

3. To set multiple discs, press DISC SKIP

button on the unit or DISC 3 or 4 button on

the remote controller. With the turn table

on the tray rotating, set the disc one by

one.

4. Press 0 button on the unit or remote

controller to close the disc tray.

5. When 3 button on the unit or remote

controller is pressed, playback starts from

the ﬁ rst track.

• At this time, “3” lights up on the display

window.

(example) To start playback from the disc 2

Disc 2/ﬁ rst track →.....→ last track

→ Disc 3/ﬁ rst track →.....→ last track

→ Disc 4/ﬁ rst track →.....→ last track

→ Disc 5/ﬁ rst track →.....→ last track

→ Stop

Caution

• Place a disc on each tray correctly. If not, the unit

cannot be operated and discs may be damaged.

• Be careful not to have your ﬁ nger caught when

you close the tray.

If the ﬁ nger is caught, press 0 button to open the

tray.

• Do not insert a disc in the way shown as the

arrow.

• Do not place any other media other than a disc on

the tray.

• Do not pile up discs on a tray. Do not place more

than two disc on a tray.

• Do not force to open/close the tray. Always use 0

button to open/close the tray.

• While the tray is open and rotating, do not touch

or stop the tray with ﬁ ngers.

PAUSE PLAYBACK

Pressing 8 button on the unit or remote controller

pauses the play.

• At this time, “8” lights up on the display

window.

• To restart the playback, press 3 button on the

unit or remote controller.

• Pressing 8 button on the unit or remote controller

again while pausing restarts the playback.

STOP PLAYBACK

Pressing 7 button on the unit or remote controller

stops the playback.

CHANGE DISCS WHILE PLAYING

You can change other discs not being played while

playing a disc.

DISC SKIP

DISC 3, 4

• While disc 1 is playing, press 0 button to open

the tray and change disc 2, 3, and 4.

To change disc 5, press DISC SKIP button on

the unit or DISC 3 or 4 button on the remote

controller to rotate the turntable on the tray, then

change the disc.

• After changing the disc, make sure to press 0

button to close the disc tray.

w r

q…Disc 1 tray r…Disc 4 tray

w…Disc 2 tray t…Disc 5 tray

e…Disc 3 tray

CC4003_U_01_Eng.indd 7CC4003_U_01_Eng.indd 7 10.3.18 8:30:59 PM10.3.18 8:30:59 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CC4003 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz CC4003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info