570956
5
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
4.
Set the controls on the 4-channel amplifier in
CONNECTING
T E
C.
-4008
accordance
with
the manufacturer's instruc-
Turn
off
the Model CD-400B and any equipment
that
will
be
connected
to
it
before making any
connections. The CD-400B must
be
used
with
a
turntable or changer equipped
with
a cartridge
designed
for
CD-4 records.
1.
Connect the turntable or changer
to
the rear
panel
of
the CD-400B
with
the special audio
cables recommended
by
the cartridge
manu-
facturer. Using any other cable may seriously
degrade the performance
of
the CD·400B.
TURNTABLE/CHANGER
CD-400B
LEFT
OUTPUT
to
lEFT
PHONO
RIGHT
OUTPUT
to
RIGHT
PHONO
GROUNDING
WIRE
to
CHASSIS
GROUND
2.
Using standard shielded audio cables
with
phono plugs make the following connections.
4·CHANNEL
AMPLIFIER
CD·400B
FRONT
CD·4/AUX
L
to 4
CHANNEL
OUT
FRONT
l
FRONT
CD-4/AUX
R
to
4 CHANNel
OUT
FRONT
R
REAR
CD-4/AUX
L
to
4
CHANNEL
OUT
REAR
L
REAR
CD·4/AUX
R
to
4 CHANNel
OUT
REAR
R
PHONO
IN
LEFT
to
2 CHANNEl
DI-
RECT
OUT
lEFT
PHONO
IN
RIGHT
to
2
CHANNEL
01·
RECT
OUTRJGHT
3.
A discrete 4-channel playback device (0-8
cartridge player, 4-channel discrete reel-to-reel
tape deck, etc.) may
be
connected
to
the CD-
400B using standard shielded audio cables
with
phono plugs
as
follows:
DISCRETE
4-CHANN.El
CD-400B
PLAYBACK
DEVICE
LEFT
FRONT
or
L F
or
CHANNEL
1
or
TRACK
1
to
FRONT
AUX
l
LEFT
REAR
or
L R
or
CHANNEL
2
or
TRACK
2
to
REAR
AUX
l
RIGHT
FRONT
or
R
For
CHANNEL
3 orTRACK 3
tp
FRONT
AUX
R
RIGHT
REAR
or
R R
or
CHANNEL
4
orTRACK
4
to
REAR
AUX
R
tions.
5.
Set the CD-400B's
front
panel MODE push-
switch
to
the 4 CH
AUTO
position.
6.
Set the
front
panel SELECTOR pushswitch
to
the PHONO position.
7. Set the rear panel DIRECT
OUT
switch
to
OFF.
8.
Connect
the
AC line cord
to
an
AC
outlet
providing the AC voltage and frequency speci-
fied on
the
rear panel serial number nameplate.
Turn on the turntable,
CD-40GB
and 4-channel
amplifier.
ADJUSTMENTS
Before the Model CD·400B
can
properly demod-
ulate CD-4 records, a few simple adjustments
must
be
made.
The following adjustment procedure should be
performed whenever a new cartridge or stylus
is
installed.
1.
Decrease
the
front
channel volume on the
'....t
main amplifier
so
that
only
the rear speakers
can
be
heard.
2.
Play the CD-4 ADJUSTMENT TONE band
of
the test record.
3. Adjust the rear panel
LEFT
SEPARATION
CONTROL
for
minimum
sound level
from
the
left
rear speaker.
4.
Play the CD-4 ADJUSTMENT TONE band
of
the test record.
5.
Adjust the rear panel
RIGHT
SEPARATION
CONTROL
for
minimum sound
from
the right
rear speaker.
6.
PlaytheCHANNELBALANCE
ADJUSTMENT
TONE band
of
the test record and using
the
BALANCE
CONTROLS
of
the main amplifier,
adjust
the
relative sound level
of
each
of
the
four
channels
to
achieve a satisfactory
four
channel balance.
NOTE: The CD-400B contains a special
circuit
to
control
the
lock
range
of
the carrier
-.t
--
detector and thereby optimize its per·
formance. No adjustments
for
carrier
level (band
2
of
the supplied test record)
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz CD-400B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info