ADDITIONAL FUNCTIONS
11
You can fade out and in CD play, e. g. to stop and start a
recording softly.
1 Press FADE during CD play to fade out.
y The display shows in steps. The volume is lowered
continuously until CD play is paused.
2 Press FADE again to fade in.
y The display shows in steps. CD play starts and the
volume is raised continuously to its previous level.
Note: You may use FADE anytime when CD play is paused to
fade in.
The volume of the CD player can be adjusted. This affects the
DIGITAL OUT output as well.
• Press VOLUME – or VOLUME + on the remote control.
y The volume of the CD player is lowered or raised. The
display shows the actual value between
VOLUME MIN and VOLUME MAX.
Important!
VOLUME –/+ is altering the signal of the output. Before
recording set the volume to VOLUME MAX and do not
change during recording.
It is possible to lock the output volume to its maximum. This
affects the DIGITAL OUT output as well. Locking the volume
can be usefull when recording from the CD-player.
• Keep EDIT pressed for more than 2 seconds.
If the voulme was unlocked:
y The display shows VOLUME FIXED and the
volume is locked.
If the voulme was locked:
y The display shows VOLUME MAX and the volume is
unlocked.
Note: If you press VOLUME –/+ and the volume is locked the
display shows VOLUME FIXED.
1 Connect your headphones to the 6.3mm PHONES socket.
2 Use LEVEL to adjust the volume of the headphones.
Note: The maximum volume on the headphones is set through
VOLUME –/+ on the remote control.
Important!
The volume of the headphones is in line with the volume of the
output. Therefore do not use VOLUME –/+ during recording.
It is possible to listen to the beginning of each track of a CD
or program. You can choose whether to play 10, 20 or 30
seconds of each track. If a disc contains CD-Text highlights
this part of the tracks is scanned and HIGHLIGHT is
displayed.
1 Press HIGHLIGHT repeatedly to switch through the different
scan modes.
y SCAN 10, SCAN 20, SCAN 30, SCAN
OFF… (SCAN OFF aborts the scan function).
2 As soon as the desired scan mode is displayed do not press
the button again.
y After 1 second scanning starts. The number and
remaining time of the actual track, and REM TIME are
displayed.
• You can interrupt scan by pressing PAUSE ;. Continue scan
by pressing PAUSE ; again.
3 Press STOP 9 to stop scanning.
or
• Press PLAY 2 to start CD play with the actual track.
Note: If you press HIGHLIGHT while SHUFFLE is active,
shuffle will be stopped before scanning.
Scanning the CD
Headphone listening
Locking the volume
Volume adjustment
Fading out and in
English
