Bedienungsanleitung Marantz CD5004 (Seite 19 von 29) (Englisch)

453887

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

ENGLISH

Edit (Edit mode)

When you record from CD to tape, you can use this function to

divide the tracks and record them on tape side A and tape side B in

accordance with the tape length. When recording, 4-second intervals

are inserted between the tracks.

• You can use the edit mode during program mode and delete program

mode.

Select “Edit” and press [ENTER].

• The “EDIT” indicator on the display lights and the tracks

stored on the disc are recorded on tape side A and tape side

(Example: Disc containing 28 tracks)

EDIT

5 6 13 14

Flashes

Last track on tape side B

Recording time of tape

Last track on tape side A

In this example, tracks 1 to 15 are recorded on tape side A

and tracks 16 to 28 are recorded on side B when a 90-minute

cassette tape is used.

Setting the recording time of a tape.

• When [8, 9] or <8/6, 7/9> is pressed

each time, the display switches the recording time setting to

46, 54, 60, 74, and 90 minutes.

• When [6, 7] or <8/6, 7/9> is pressed

each time, you can change the recording time in 1-minute

increments.

• You can also use the number buttons to enter the setting time

directly.

• [Example] To set 46 minutes, press [4] and [6].

NOTE

When “ ” is displayed on the right of the last track on tape side B,

tracks following the last track on tape side B are not played.

Flashes

In this example, tracks after track 17 are not played.

Performing menu settings

Button located on both the main unit and

the remote control

BUTTON

Button only on the main unit

Button only on the remote control

[BUTTON]

Symbols used to indicate buttons in this manual

DISPLAY

OFF

MP3/WMA

PHONES





LEVEL

CD PLAYER CD5004

ON/STANDBY

STANDBY

ON/STANDBY>

<7 / 9>

<8 / 6>

[NUMBER]

(0~9)

[ENTER]

[6, 7]

[Q.REPLAY]

[8, 9]

[MENU]

Peak (Peak level search)

You can avoid distortion and noise in a recording if you adjust the

recording level of the cassette deck in relation to the peak volume

level on a disc. This unit can detect portions with relatively high

volume levels over the entire disc or programmed tracks.

Select “Peak” and press [ENTER].

• The “PEAK” indicator on the display lights and the peak level

search starts from the ﬁ rst track on a disc.

• When the peak level search of the last track is ﬁ nished, a

6-second segment before and after portions with relatively

high volume level is played repeatedly.

• Adjust the recording level of the cassette deck during the

above 6-second repeated playback.

(For further information, refer to the user guide of the cassette

deck.)

TTL

TRK

PEAK

TIME

TEXT

12 34 56 78 910 1112 1314 1516 1718 1920

On On

Press 2 to stop playback of the peak location.

NOTE

There are multiple locations on a disc where the volume level may be

high. Therefore, each time you perform the peak level search on the

same disc, different high peak levels may be detected.

1.CD5004U_ENG_0528.indd 151.CD5004U_ENG_0528.indd 15 2010/05/28 15:42:092010/05/28 15:42:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CD5004 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz CD5004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info