Bedienungsanleitung Marantz CD5400 (Seite 25 von 31) (Englisch)

522853

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH

3. After A side program complete, player turns to the pause

state at the beginning of B side program.

4. When A side of the tape ends up, cassette deck inverts

its recording direction and set to rec pause state

automatically.

5. Press 3 or 8 buttons of the player manually to start B side

recording. Player sends out signal to restart recording and

starts playing B side program after 4 seconds.

6. After B side program complete, player stops playing and

clears edit program automatically.

Note:

• If the tape ends up before edit program of one side

completes, for example by wrong tape length have

chosen, cassette deck send out signal to player to let

the player cancel the rest of program. Player jumps to

the beginning of B side if it was A side or stop playing

and clear edit program if it was B side.

• Synchro recording can be started only when a Marantz

autoreverse cassette deck (ex. SD4050, SD555 etc.) with

synchro recording compatibility is connected to the CD

player.

• Synchro recording is performed through the remote line

connection (rear panel jacks).

• Program edit

This procedure allows you to record tracks in any desired

order while fitting the tracks into a specified tape length.

1. Program tracks according to the programming procedure

in section “PROGRAM PLAY” (page 17).

2. The rest of the program edit procedure is the same as

step 1 to 3 in the simple edit procedure.

• Delete program edit

When recording from a disc to a tape, this procedure allows

you to omit the tracks you do not want to record, while fitting

the tracks into a specified tape length.

1. Program tracks according to the “delete programming”

procedure in the “PROGRAM PLAY” section (page 19).

2. The rest of the delete program edit procedure is the same

as step 1 to 3 in the simple edit procedure.

Note:

• During the simple edit play, program edit play and delete

program edit play, any operations other than the STOP,

OPEN/CLOSE and TIME Display OFF buttons are

disabled. This is intended to prevent mistakes in

recording due to erroneous operation.

• While editing, remote control operations are disabled.

• The display is always in the time display mode during

edit play. It is not possible to switch to the text display

mode.

• Start Edit Recording

Before start editing, connect remote control input of Marantz

cassette deck with remote control output of CD5400 by remote

control cable.

Reverse mode switch may be set to any of one side (

both sides (

) and continuous play ( ).

- Synchro recording with Marantz auto reverse cassette

deck set to both sides (

) or continuous play ( )

mode.

1. After setting up, setup the cassette deck to rec pause

state.

2. Press 3 or 8 buttons of the player to start A side program.

The player sends out signal to start recording and starts

playing A side program after 4 seconds.

STOPPLAY

PAUSE

PHONES LEVEL

TTL

TRK

TTL

TIME

–

EDIT

TEXT

12 34 56 78 910 1112 1314 15

TTL

TRK

TTL

TIME

EDIT

TEXT

16 17 18 19 20

Total number of tracks on side B

Total playing time

of side B

Number indicators of tracks assigned to side B light up.

STOPPLAY

PAUSE

PHONES LEVEL

ADVANCED OPERATIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CD5400 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info