Bedienungsanleitung Marantz CD6004 (Seite 33 von 38) (Englisch)

453889

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Getting started

Basic connections Basic operation Speciﬁcations IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting

ENGLISH

Getting started

Basic connections Basic operation Speciﬁcations IndexAdvanced connections Explanation of terms TroubleshootingTroubleshootingAdvanced operations

If a problem should arise, ﬁrst check the following:

1. Are the connections correct?

2. Is the set being operated as described in the owner’s manual?

3. Are the other devices operating properly?

If this unit does not operate properly, check the items listed in the table below. Should the problem persist,

there may be a malfunction.

In this case, disconnect the power immediately and contact your store of purchase.

Problem Cause Corrective action Page

The disc fails to rotate. •The power cord is pulled out

of the socket.

•Insert the power cord plug

into the socket.

•Power to this unit is not ON. •Turn the power to this unit

ON.

•The disc is not placed in the

correct position on the disc

tray.

•Place the disc in the disc tray

correctly.

•The disc is placed in upside

down. (The disc is placed in

with the label facing down).

•Place the disc in the disc tray

correctly.

The disc stops rotating

in mid-operation.

•The disc is dirty. •Clean the disc’s surface. 4

•The disc is scratched. •The disc may be unable to

be played if it has a lot of

scratches.

–

•The disc is warped. •The disc may be unable to be

played if it is badly warped.

–

The disc is rotating but

no sound is heard.

•The ampliﬁer and speakers are

not connected correctly.

•Connect the cables correctly.

(See the instruction manual

for the ampliﬁer.)

•The ampliﬁer power is not ON. •Turn ON the power to the

ampliﬁer.

(See the instruction manual

for the ampliﬁer.)

–

•The ampliﬁer’s function or

selector switch is not set to

“CD” or “AUX” or such (to

whatever you have connected

this unit to).

•Switch the ampliﬁer’s

function or selector switch

to “CD” or “AUX” or such

(to whatever you have

connected this unit to).

(See the instruction manual

for the ampliﬁer.)

–

•The ampliﬁer’s volume control

is set at the minimum level.

•Adjust the ampliﬁer volume.

(See the instruction manual

for the ampliﬁer.)

–

Troubleshooting

Problem Cause Corrective action Page

CD-R/CD-RW disc

cannot be played.

•The disc is placed in upside

down.

•Place the disc in the tray

correctly.

•The information recorded is not

in an audio (CD-DA) format. Or

the MP3/WMA/AAC ﬁle was

not properly recorded.

•Record correct information

that is compatible with to this

unit.

GDisplayH

Problem Cause Corrective action Page

“OverCurrent” appears

on the display.

•The voltage able to be

supplied from this unit via the

USB memory device has been

exceeded.

•The USB memory device is

not supported. Please use a

USB memory device with an

operating current that is less

than 1 A.

–

“FAT Error” or “Cluster

Err” appear on the

display.

•An unsupported ﬁle system

is being used. USB memory

device below 128 MB cannot

be supported.

•Please use a USB memory

device formatted with a

compatible ﬁle system (FAT32

or FAT16) and that has at

least 256 MB of memory.

–

“No File” appears on

the display.

•No ﬁle able to be played on this

unit exists.

•Check supported formats. 15, 18

“DRM Stream”

appears on the display.

•This is a ﬁle subject to digital

rights management.

•Cannot play on this unit

because of unsupported

DRM.

16, 18

GUSB/iPodH

Problem Cause Corrective action Page

Sound cannot be

heard even when USB

memory device is

connected.

•The ampliﬁer and speakers are

not connected properly.

•Connect the cables correctly.

(See the instruction manual

for the ampliﬁer.)

•The ampliﬁer power is not ON. •Turn the ampliﬁer power ON.

(See the instruction manual

for the ampliﬁer.)

–

•The ampliﬁer’s function or

selector switch is not set to

“CD” or “AUX” or such (to

whatever you have connected

this unit to).

•Switch the ampliﬁer’s

function or selector switch

to “CD” or “AUX” or such

(to whatever you have

connected this unit to).

(See the instruction manual

for the ampliﬁer.)

–

•The ampliﬁer’s volume control

is set at the minimum level.

•Adjust the ampliﬁer volume.

(See the instruction manual

for the ampliﬁer.)

–

Explanation of terms

GDiscH

1.CD6004N_ENG_最終検図完_0701.indd 28 2011/07/01 15:45:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CD6004 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz CD6004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info