Bedienungsanleitung Marantz CDR500 (Seite 16 von 35) (Englisch)

489894

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

ENGLISH

To start recording press

0 (4).

➔ The display shows the real remaining time for the se-

lected recording. High speed recording starts.

lights continuously.

• To check the elapsed recording time, press

TIME

(14) or

DISPLAY

(77). This can be done during recording.

• Recording will stop automatically.

To stop recording manually, press

STOP

(5, 87).

➔

goes out and recording stops.

• If 9

STOP

(5, 87) was pressed within 3 seconds after 0 (4),

no recording will take place.

• After recording, the display shows for several sec-

onds. The Total time indications can differ slightly. However,

no music information is lost.

Note:

- In this Recording mode, the Pause function is not operative.

Important:

If you want to play the recorded CD-R(W) disc on any regu-

lar CD player, it must first be finalized. (See FINALIZING/

UNFINALIZNG page 15).

The recorded sound might be distorted when you adjust

the recording level to set above 0dB for digital recording

and -12dB for analog recording. The default setting of

recvolume for digital is 0dB and analog is -12dB when this

CD-Recorder is shipped.

Finalized CD-RW discs play only on CD-RW compatible CD

players.

RECORDING (FROM INTERNAL CD-DECK)

The numbers between parentheses refer to the fold-out.

Double speed recording

Using internal CD player.

• During double speed recording the sound is not audible.

Make sure that the recording disc is absolutely free of

scratches and dust particles.

To choose the type of recording, press

REC MODE

(10).

once: to select

if you wish to make a

fast recording of a disc or programmed tracks.

three times: to select

if you wish to make a

fast recording of a disc or programmed tracks

and to automatically finalize the recording.

Also see ‘FINALIZING CD-R & CD-RW’ discs

on page 15.

The

label starts blinking. After 3 seconds

the display shows the remaining CD-R(W) recording

time on the left and total time of source on the right.

(every 2 seconds

is displayed.)

Both selection indicators are lit.

• Press

PROG

(18,91) on the remote control to select one

or more tracks for recording (see PROGRAMMING):

- rotate the

REC/LEVEL SELECT

(13) key to the required

track number, then press

PUSH

ENTER

(13).

or:

- directly select the track number via the

10-keypad

(76)

on the remote control, then press

ENTER

(84).

MENU/

STORE

CANCEL/

DELETE

987

654

321

RANDOMPROG.REPEATSCAN

CDR

ABC DEF GHI

JKL MN OPQ

RST UVW XYZ

DISPLAY

SPACE

SCROLL

FUNCTION

ENTER

HEADPHONE

CD RECORDER/CD PLAYER CDR500

PROG

FINAL

TEXT

LEVEL

TIME

CDPLAY MODECDR

INPUT

ERASE

POWER

STANDBY

010

PUSH ENTER

REC LEVEL/SELECT

Recordable

ReWritable

STORE

REC

MODE

CANCL

DELETE

erw

CDR500N P01-14 (E) 9/7/00, 5:12 PM10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CDR500 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info