Bedienungsanleitung Marantz CDR500 (Seite 20 von 35) (Englisch)

489894

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

ENGLISH

RECORDING

To start recording, press PLAY on the selected source.

➔ The CD-Recorder automatically starts to record. The re-

cording time left appears on the display.

• If, however, you start the source during a track, CD-

SYNC recording starts at the beginning of the next track

or after 2.7 seconds of silence in analog recordings.

• To check the elapsed recording time, press

TIME

(14) or

DISPLAY

(77). (This can also be done during recording)

• The recorder stops automatically.

To stop recording manually, press

9 (5, 87).

• If 9 (5, 87) was pressed within 3 seconds after pressing

PLAY

on the selected source, no recording will take

place.

• To interrupt recording, press 2/;

(6) or ; (82).

To resume, press 0 (4) on the CD-Recorder.

After recording the display will show for sev-

eral seconds.

Note:

- Recordings from DAT, DCC or analog sources will only stop

after 20 seconds silence.

- With , recordings from DAT, DCC or

recordings made analogously will stop after 20 seconds si-

lence. With

, the auto stop mode is

disabled.

- MAKE CD will automatically finalize the CD-R(W) after syn-

chronized recording. It takes about 1 minute to start auto fi-

nalizing after finish recording the last track. (WAIT appears

on the display.)

- The recorded sound might be distorted when you adjust the

recording level to set above 0dB for digital recording and -

12dB for analog recording. The default setting of recvolume

for digital is 0dB and analog is -12dB when this CD-Recorder

is shipped.

Important:

If you want to play the recorded CD-R disc on any regular

CD player, it must first be finalized. See finalizing discs.

Finalized CD-RW discs play only on CD-RW compatible CD

players.

CD-SYNC

The CD-SYNC feature enables you to make fast and easy re-

cordings of a CD. Track increments are automatically detected

from the source material. Track increments cannot be added

manually. In analog source material a silence (<- 55dBFS) of

2.7 seconds or more is automatically detected as a track incre-

ment.

Make sure the disc is absolutely free of scratches and

dust particles.

Connect the cable from an external CD player to the CD-

Recorder. (see INSTALLATION from page 5 to 6.)

Press

INPUT

(9) repeatedly until the selected source,

appears on the display (depending on the digital connec-

tion used):

➔

, or lights up and ,

or appears on the display.

4 With the CD-Recorder stopped, press

REC MODE

(10)

four times: if you wish to record a complete disc or pro-

gram.

➔

start to flash and the display shows

• If or flashes, the digital connection is incor-

rect.

Note:

You can adjust the recording level by rotating the

REC LEVEL/

SELECT

(13).

DIGITAL RECORDING : +6dB ~ –63dB

ANALOG RECORDING : 0dB ~ –63dB

The numbers between parentheses refer to the fold-out.

MENU/

STORE

CANCEL/

DELETE

987

654

321

CDR

ABC DEF GHI

JKL MN OPQ

RST UVW XYZ

DISPLAY

SPACE

SCROLL

FUNCTION

ENTER

HEADPHONE

CD RECORDER/CD PLAYER CDR500

PROG

FINAL

TEXT

LEVEL

TIME

CDPLAY MODECDR

INPUT

ERASE

POWER

STANDBY

010

PUSH ENTER

REC LEVEL/SELECT

Recordable

ReWritable

STORE

REC

MODE

CANCL

DELETE

yre

CDR500N P01-14 (E) 9/7/00, 5:12 PM14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz CDR500 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info