Bedienungsanleitung Marantz DR6000 (Seite 13 von 26) (Englisch)

522848

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

With the recorder stopped, press

REC TYPE

(20) three

times to enter the Manual Record standby mode.

➔ MANUAL starts to flash and the display shows

• If message also flashes, the digital con-

nection is incorrect.

Set the optimal recording level on the CD-Recorder.

q Play the source first to set the optimal recording level on

the CD-Recorder.

w Rotate the

EASY JOG

(12) key until, on the Record/Play

Level bar, all the white segments are alight, but the red

segments do not light continuously during the loudest

passages.

DIGITAL RECORDING : + 6dB ~ –63dB

ANALOG RECORDING : 0dB ~ –63dB

e Stop the source.

To start recording, press

REC

(13) on the CD-Re-

corder and immediately start the source (from Stop-

mode).

The track number and recording time left appear on the display.

• To record a 3-second silence at the start of a track,

press 2/;

PLAY/PAUSE

(16) on the CD-Recorder

before starting the source.

• To check the elapsed recording time, press

DISPLAY

(58) on the CD-Recorder. (This can also be done dur-

ing the recording.)

To stop recording, press

STOP

(17, 68).

• If 9

STOP

(17, 68) was pressed within 3 seconds af-

ter 0

REC

(13), no recording will take place.

• To interrupt recording, press 2/;

PLAY/PAUSE

(16)

or ;

PAUSE

(63).

After recording the display will show

for sev-

eral seconds.

Important:

If you want to play the recorded CD-R disc on any regular

CD player, it must first be finalized. See finalizing discs.

Finalized CD-RW discs play only on CD-RW compatible CD

players.

RECORDING

MENU/

STORE

CANCEL/

DELETE

987

654

321

CDR

ABC DEF GHI

JKL MN OPQ

RST UVW XYZ

DISPLAY

SPACE

SCROLL

FUNCTION

ENTER

Recordable

ReWritable

POWER

CD RECORDER DR6000

PLAY/PAUSESTOP

REC

PUSH ENTER

EASY JOG

LEVEL PHONES

REC TYPE REW FF

FINALIZE

DELETE

CANCEL

STORE

SOURCE ERASE

OPEN/CLOSE

DISPLAY SCROLL

ON/OFF

Manual start recording

Manual recording from external CD player.

Make sure the disc is absolutely free of scratches and

dust particles.

Connect the cable from an external CD player to the CD-

Recorder. (see INSTALLATION page 5 and 6.)

Press

SOURCE

(7) repeatedly until the selected exter-

nal source appears on the display (depending on the

connection used):

➔ , or lights up and ,

or appears on the display.

About Auto Track increment

• When Auto Track is ON (default setting), track numbers

will automatically be increased during recording.

• To switch off the Auto Track function you have to enter

MENU MODE.

If you wish to increase track numbers manually, press

TRACK INCR(ement) on the remote control. For further

instructions see MENU MODE.

ON (AUTO): The track increments are automatically

taken over from the digital source material

or after 2.7 seconds silence during analog

recording.

OFF (MANUAL): Track numbers can be incremented

manually by pressing

TRACK INCR

(ement) (54) on the remote control.

(Minimum track length is 4 sec.)

• Track numbers cannot be changed after recording.

Note:

Auto track works only with Consumer Sources with a digital

output signal according to the IEC 958 (consumer part) audio

standard.

The numbers between parentheses refer to the fold-out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz DR6000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info