Bedienungsanleitung Marantz DR6050 (Seite 12 von 28) (Englisch)

522849

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

To start recording press

REC

(4).

➔ The display shows the real remaining time for the se-

lected recording. High speed recording starts.

lights continuously.

• To check the elapsed recording time, press

DISPLAY

(72).

This can be done during recording.

• Recording will stop automatically.

Note:

Copy prohibited tracks will be copied analog.

is displayed.

To stop recording manually, press

STOP

(5, 24, 82).

➔

goes out and recording stops.

• If 9

STOP

(5, 24,82) was pressed within 3 seconds after 0

REC

(4), no recording will take place.

• After recording, the display shows for several sec-

onds. The Total time indications can differ slightly. However,

no music information is lost.

Note:

- In this Recording mode, the Pause function is not operative.

Important:

If you want to play the recorded CD-R(W) disc on any regu-

lar CD player, it must first be finalized. (See FINALIZING/

UNFINALIZNG page 13).

There is a chance that the sound will be distorted if the

recording level is set at a value that exceeds 0 dB for dig-

ital sound sources and -12dB for analog sound sources.

The factory settings at the time of shipping are 0 dB for

digital sound sources and -12dB for analog sound

sources.

Finalized CD-RW discs play only on CD-RW compatible CD

players.

RECORDING (FROM INTERNAL CD-DECK)

The numbers between parentheses refer to the fold-out.

MENU/

STORE

CANCEL/

DELETE

987

654

321

RANDOMPROG.REPEATSCAN

CDR

ABC DEF GHI

JKL MN OPQ

RST UVW XYZ

DISPLAY

SPACE

SCROLL

FUNCTION

ENTER

Recordable

ReWritable

SOURCEREC TYPE

OPEN/

ERASE FINALIZE

POWER

ON/OFF

PLAY/PAUSESTOP

REC

CDR

CD RECORDER DR6050

PLAY/PAUSESTOP

CD DJ MODE

EASY JOG

PUSH ENTER

CANCEL/DELETESTORE/MENU

PHONES

STANDBY

Double speed recording

Using internal CD player.

• During double speed recording the sound is not audible.

Make sure that the recording disc is absolutely free of

scratches and dust particles.

To choose the type of recording, press

REC TYPE

(11).

once: to select

if you wish to make a

fast recording of a disc or programmed tracks.

three times: to select if you wish to make a

fast recording of a disc or programmed tracks

and to automatically finalize the recording.

Also see ‘FINALIZING CD-R & CD-RW’ discs

on page 17.

The

label starts blinking. After 3 seconds

the display shows the remaining CD-R(W) recording

time on the left and total time of source on the right.

(every 2 seconds

is displayed.)

Both selection indicators are lit.

• Press

PROG

(86) on the remote control to select one or

more tracks for recording (see PROGRAMMING):

- rotate the

EASY JOG

(19) key to the required track

number, then press

PUSH

ENTER

(19).

or:

- directly select the track number via the

10-keypad

(71)

on the remote control, then press

ENTER

(79).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz DR6050 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info