Bedienungsanleitung Marantz DR6050 (Seite 15 von 28) (Englisch)

522849

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

RECORDING (FROM EXTERNAL SOURCE)

The numbers between parentheses refer to the fold-out.

MENU/

STORE

CANCEL/

DELETE

987

654

321

CDR

ABC DEF GHI

JKL MN OPQ

RST UVW XYZ

DISPLAY

SPACE

SCROLL

FUNCTION

ENTER

Recordable

ReWritable

SOURCEREC TYPE

OPEN/

ERASE FINALIZE

POWER

ON/OFF

PLAY/PAUSESTOP

REC

CDR

CD RECORDER DR6050

PLAY/PAUSESTOP

CD DJ MODE

EASY JOG

PUSH ENTER

CANCEL/DELETESTORE/MENU

PHONES

STANDBY

• To check the elapsed recording time, press

DISPLAY

(72). (This can also be done during recording)

• The recorder stops automatically.

To stop recording manually, press

STOP

(5) on the

CD-Recorder.

• If 9

STOP

(5) was pressed within 3 seconds after press-

ing

PLAY

on the selected source, no recording will take

place.

• To interrupt recording, press 2/;

PLAY/PAUSE

(6) on

the CD-Recorder.

To resume, press 0

REC

(4) on the CD-Recorder.

After recording the display will show

for sev-

eral seconds.

Note:

- Recordings from DAT, DCC or analog sources will only stop

after 20 seconds silence.

- With , recordings from DAT, DCC or

recordings made analogously will stop after 20 seconds si-

lence. With , the auto stop mode is

disabled.

Important:

If you want to play the recorded CD-R disc on any regular

CD player, it must first be finalized. See finalizing discs.

There is a chance that the sound will be distorted if the

recording level is set at a value that exceeds 0 dB for dig-

ital sound sources and -12dB for analog sound sources.

The factory settings at the time of shipping are 0 dB for

digital sound sources and -12dB for analog sound

sources.

Finalized CD-RW discs play only on CD-RW compatible CD

players.

CD-SYNC

Autostart recording from external CD player CD-SYNC.

The CD-SYNC feature enables you to make fast and easy re-

cordings of a CD. Track increments are automatically detected

from the source material. Track increments cannot be added

manually. In analog source material a silence of 2.7 seconds or

more is automatically detected as a track increment.

Make sure the disc is absolutely free of scratches and

dust particles.

Connect the cable from an external CD player to the CD-

Recorder. (see INSTALLATION page 5 and 6.)

Press

SOURCE

(12) repeatedly until the selected

source, appears on the display (depending on the digital

connection used):

➔

, or lights up and

, or appears on the

display.

r With the CD-Recorder stopped, press

REC TYPE

(11)

four times: if you wish to record a complete disc or pro-

gram.

➔

start to flash and the display shows

• If message also flashes, the digital

connection is incorrect.

To start recording, press

PLAY

on the selected source.

➔ The CD-Recorder automatically starts to record. The re-

cording time left appears on the display.

• If

or blinks, the digital connecetion is incor-

rect.

• If, however, you start the source during a track, CD-

SYNC recording starts at the beginning of the next track

or after 2.7 seconds of silence in analog recordings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz DR6050 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info