Bedienungsanleitung Marantz dv3002 (Seite 11 von 54) (Englisch)

137423

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

2Connecting Up

English

Ver 1.0

AUDIO

COMPONENT

COAX.

HDMI

ANALOG

AC IN

VIDEO

A/V EUROCONNECTOR

Home theater video con nec tions

This player outputs video in a number

of different ways. Choose the one most

suit able for your system using the guide

below.

Connecting SCART (for Europe only)

and S-Video cables

SCART and S-Video cables will only plug in

one way, so make sure the plug is correctly

lined up with the jack before inserting. Be

sure to fully insert for a good con nec tion.

Note

• The A/V EURO CONNECTOR can output

com pos ite or RGB component video. If you

connect just one TV, use the A/V EURO

CONNECTOR. You can select the type of video

output by changing the COMPONENT setting in

the DVD Setup Menu (page 41).

S-Video or composite video?

S-Video should give a better picture, so if

you have an S-Video input, use it. S-Video

cables are available from any good audio/

visual dealer.

Connecting HDMI cables

With an HDMI cable, both uncompressed

video data and digital audio data (e.g.,

LPCM or bit stream data such as Dolby

Digital, DTS, or MPEG data) can be

trans mit ted with just a single connector.

By transmitting DVD image data directly as

digital data without it being ﬁ rst converted

into analog format, it becomes possible to

provide the very ﬁ nest in image quality (see

pages 36, 39-41).

Note

• The HDMI output of this unit can be con nect ed

to a DVI jack on a TV or other device using a

conversion adapter. In this case, it is necessary

to use a TV or display with an HDCP-com pat i ble

DVI input.

• There may be no image output if con nect ed to

a TV or display that is not com pat i ble with the

above format.

• Refer to the instruction manual of the TV or

display to be connected to this unit for detailed

information regarding the HDMI terminal.

• When connecting a progressive input TV with the

component output of the player, select ON in

the Progressive setting (see page 38).

If your TV has a component video input, we

rec om mend using it to connect directly to the

COM PO NENT VIDEO OUT of this player. Use

the standard 3-jack component video output.

If a component input is not

available to you, connect this

player to your TV or AV receiver

using either the VIDEO or S1

jacks.

Plug into a standard

AC wall outlet.

If your TV and projector have

a HDMI terminal for Video and

Audio Input, we recommend

using it to connect directly to

the HDMI out of this player.

If your TV has a SCART input, we

rec om mend using it to connect directly

to the A/V EURO CONNECTOR on

this player. (for Europe only)

Important

• Before making or changing any rear panel

connections, make sure that all components are

switched off and unplugged from the wall outlet.

• While a connected component is turned on,

do not unplug the power cord of this DVD

player from the wall outlet. The speaker may be

dam aged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz dv3002 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info