Bedienungsanleitung Marantz dv4400 (Seite 13 von 28) (Englisch)

136550

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

–

English

Connection to an audio system

Stereo system

NOTES

• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup

mode. (See page 24)

• If output DTS audio, connect to a DTS decoder, and set DTS to “ON” for audio output in the setup mode. (See page 24)

•

If output MPEG auido, connect to a MPEG decoder and set MPEG to “ON” for audio output in the setup mode. (See page 24)

•

Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to “OFF” for audio output in the setup

mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page

24)

• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or

DAT deck.

•

Set Dolby Digital and DTS to “OFF” for audio output in the setup mode for method 1 only. Playing a DVD using incorrect set-

AUDIO

DVD

Audio Input Jacks

Digital Audio Input

Jacks

Analog Audio Out

Digital Audio Out

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder

Dolby Digital decoder,

DTS decoder

MPEG decoder

Method 1 Method 2

CONNECTIONS

The following show examples of connections commonly used to connect the DVD player either TV and other

components.

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format,

the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO

OUT jacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH

OUTPUT jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing,

realistic ambience with powerful and high-quality surround sound of a professional standard, which can be

heard in movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections.

Use audio cables (commercially available ) for the 5.1 CH audio connection.

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the

DVD player.

Optical cable (not supplied)

• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-

ter of 15 cm or more when storing them.

• Use a cable which is 3m or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz dv4400 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info