Bedienungsanleitung Marantz DV6600 (Seite 13 von 36) (Englisch)

65482

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

–

English

Connection to an Audio System

Stereo system

NOTES (for method 2 only):

• When using an AV amplifier with a built-in decoder (Dolby Digital, DTS, or MPEG decoder) as shown in the Method 2, set

“DOLBY DIGITAL”, “DTS” or “MPEG” to “BITSTREAM” accordingly for audio output in the setup menu (refer to pages 28-29).

Set it to “PCM” for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distor-

tion, and may also damage the speakers.

• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD

deck or DAT deck.

• Set “DOLBY DIGITAL”, “DTS” and “MPEG” to “PCM” for audio output in the setup menu for connecting to an MD deck or DAT

deck (refer to pages 28-29).

• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a

decoder, etc., that is not DTS-compatible.

• When playing back a copyright-protected over 96kHz (88.2kHz) PCM DVD, the digital sound will be down-sampled at 48kHz

(44.1kHz), even if you set “DOWN SAMPLING” to “OFF” (refer to page 28).

•

Super Audio CD sound is not output from the DIGITAL OUT.

AUDIO

DVD

Audio Input

Jacks

Digital Audio

Input Jacks

AUDIO OUT

(Analog)

DIGITAL OUT

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder

Dolby Digital decoder,

DTS decoder

MPEG decoder

Method 1 Method 2

CONNECTIONS

The following show examples of connections commonly used to connect the DVD player to the TV and other

components.

If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format,

the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.

By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-

ence with powerful and high-quality surround sound of a professional standard, which can be heard in movie

theatres. Use an audio coaxial digital or optical cable (commercially available) for the audio connections.

NOTES:

• Be sure to turn off the power of all components in the system before connecting another component.

• Refer to the instruction manuals for your TV, Stereo system and any other components to be connected to the

DVD player.

Optical cable (not supplied)

• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a

diameter of 15 cm or more when storing them.

• Use a cable which is 3m or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

Audio Cable

(supplied)

Optical Cable

(commercially

available)

Audio Coaxial

Digital Cable

(commercially

available)

E61M7ED/E61M9ED(EN).qx3 05.8.4 5:27 PM Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz DV6600 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz DV6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info